Ok guys, i know there are several post about pipes scraping with the 109 lowered or raised. I am having the same problem, i scrape when leaning into deep to the right. My question is does anyone know where i can get a custom pipe for the nine so that i can slam this thing on that fat 280? i want to lower the 9 but pipes will not let me. If anyone has a custom pipe they want to trade let me know. These pipes are only about couple of months old and maybe 2000 miles on them.
T-rexatl
Pipes and lowering
I have the Hacker pipe that is a 2 into 1 turned out the side and when it was new it drug something terrible but with a few simple mods I was able to stop it from dragging at all. I run an air ride and I can slam it all the way down and not drag my pipes at all. The foot peg hits first.
I had to remove the mounting bracket that held the collector on, pull the 2 primary tubes up slightly and attach the collector to them without a bracket.
It looks good and does not drag.
I had to remove the mounting bracket that held the collector on, pull the 2 primary tubes up slightly and attach the collector to them without a bracket.
It looks good and does not drag.
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
