I have a m109r 2008 with 19,000 miles on it, I got it with just a little over 18,000. No weird knocking noises nor did it run weird. But just changed the oil and found a uncomfortable amount of metal flakes ( not little specs actual flakes) on rear drain plug magnet and in oil pan. Pulled stator...

hi guys you might know i cut my oem pipes down a while ago basically i cut 13 inches off each pipe and removed the baffles .. couple of questions ... will my bike be fueling ok with the pipes cut it's all standard apart from the pipes ? the bike is 2016 ... i would like to add some...

Rode about 10 miles to doctor and noticed oil light on. Got home and filled up oil and noticed almost no coolant. Filled up coolant. Rode 3.1 miles and the same thing happened. Coolant low again but no oil light. Rode 3.1 miles and oil light on, came home and coolant past the low mark. No...

Last week I replaced all of my M109R clutches with new set due to slippage problem. After replacing them and adjusting the cable things were running perfect with no problems at all and with 100% power. After two rides the bike start slipping again so, I decided to disassemble the clutches again...

It’s been a while since I’ve been in here. So I was hit up by M109dreamer about possibly getting this ride going again. Thinking maybe sometime in the beginning of November. I need people to chime in to see what’s going to happen. It’s a beauty of a ride especially when Kwirme comes up with the...