Since I am not an electrician I thought I'd reach out to the forum on this one. I bought a used 2008 M109R a few months ago that had been laid down. The previous owner had drilled the rear cowl and cobbed up the broken rear turn signals into the holes. The bike had already been debeavered and an integrated tailight installed. I removed his crappy looking rear turn signals, plugged the holes and figured I would rely on the integrated tailight's built in turn signals going forward. I terminated the turn signal leads, wire nutted and taped them up, and tucked them up by their respective handrails. Now when I hit the turn signal button, the front signals and tailight signals hyperflash. I'm hoping someone can offer up a fix. I'm also curious as to the legality of not have rear turn signals except for those in the tailight. Thanks in advance.