M109 Rider Forums banner

1 - 10 of 10 Posts

·
Registered
Joined
·
126 Posts
Discussion Starter · #1 ·

·
Registered
Joined
·
126 Posts
Discussion Starter · #4 ·
Thanks guys and yea that is a slightly modified direct line plate mount. I drilled new holes to allow it to sit deeper under the fender.
 

·
Registered
Joined
·
126 Posts
Discussion Starter · #6 ·
I used 19 of 20 individual LEDs from Sik-Lite systems.http://www.siklite.com/
I liked the fact that you can hide the LED very nicely and aim it to highlight what you want it to. You almost have to lay on the ground to see the LEDs. Locating the placement took some time. Wiring was pretty basic and I used a remote switch by Street Magic. You can get them here http://www.boogey.com/remote_control_switch.htm or @ J&P for about the same $$. I wrapped it with some foam and elec tape and zip tied it to the outside of the battery box on the right side. Fit perfectly.
Most of these photos make the lighting effect look way bright, but it is much more subtle and a deeper red. These were the :hot: "Thank God Its Done" photos in the back yard @ ? A.M. I'll get better pic and I have more mods planned too.
Peace :doorag:
 
1 - 10 of 10 Posts
Top