M109 Rider Forums banner
1 - 20 of 68 Posts

·
Registered
Joined
·
75 Posts
Looks cool from distance bullrider. Need a bigger pic. Tell us more about it man. Is she cut out with mesh behind like a Ducks mod?
 

·
Registered
Joined
·
198 Posts
very nice!!!! im surprised no one has done this yet!
 

·
Registered
Joined
·
800 Posts
Now your going to have to do mine...Looks good J. You still using the K/N filter's behind...
 

·
Registered
Joined
·
319 Posts
i like it :congrats:
 

·
Registered
Joined
·
467 Posts
:drool:Looks great Jason!
 

·
Radio Active Member
Joined
·
27,696 Posts
If you give her a breast augmentation and put some more junk in the trunk, you bike will run stronger. :evil: :evil: That way your bike will suck even more air. :doorag:

Very nicely done though. :bigthumbsup:
 

·
Registered
Joined
·
2,071 Posts
Discussion Starter · #15 ·
If you give her a breast augmentation and put some more junk in the trunk, you bike will run stronger. :evil: :evil: That way your bike will suck even more air. :doorag:

Very nicely done though. :bigthumbsup:
I did that on the right one LOL! So i guess the left side will be slower?

:dontknow: I will be going in circles!
Damn
 

·
Radio Active Member
Joined
·
27,696 Posts
I did that on the right one LOL! So i guess the left side will be slower?

:dontknow: I will be going in circles!
Damn
No because it all goes into the air box. So I would think that total volume is what matters. Did you plug up the back holes in the black part of the air filter housings?
 

·
Radio Active Member
Joined
·
27,696 Posts
No I did not. What would be the effect if I did?
Oh ya. You really get more gain by having the cold air go in vs the Hot air between the jugs. But if your cuts are to small you will starve the engine of air. As long as your cubic inches are the same or greater then the back hole, you will be fine.
 
1 - 20 of 68 Posts
Top