M109 Rider Forums banner
1 - 5 of 5 Posts

·
Registered
Joined
·
48 Posts
Discussion Starter · #1 ·
Hi All

i am just about to change the setting the on my rear shock and would ideally like it stiffer, can some tell me if No 8 setting is the stiffest or No1 not sure which way to go and seeing that it looks fiddley would like to do it right first time

thanks

Karak
 

·
Registered
Joined
·
1,626 Posts
I believe that No. 7 or 8 is the stiffest setting and No. 1 is the lightest, it usually comes stock set at 4. Mine is set at 6.
 

·
Registered
Joined
·
2,263 Posts
8?

7 is the highest setting, after that, it goes back to 1. If you can get on an angle to see it, not too visible, you'll see that the adjustment ring has notches that step up the resting point of the shock, until it reaches it's maximun length. One more click, and it's past the end and back to 1.
I like mine at 7 for maximum lean clearance, but most here seem to find that too harsh........each to their own. With a 250/160 tire combo, and 1 inch higher floorboards, I can lean pretty good without touching anything.
 

·
Registered
Joined
·
50 Posts
Hey,,, 7 is the highest,, i have mine set at 1, but it's like the previous post said, each is own,,,,
 
1 - 5 of 5 Posts
Top