M109 Riders banner

21 - 31 of 31 Posts

·
Registered
Joined
·
47 Posts
Discussion Starter #21
Hi there
I've have heard that kuryakyn 8828
Will fit into that rear position
Just wondering
 

·
Registered
Joined
·
47 Posts
Discussion Starter #23
The guy who own this business
Wouldn't tell me what adaptor he used for this,
So after some research, hopefully kuryakyn 8823 will fit
If it does I will let you know
 

·
Registered
Joined
·
47 Posts
Discussion Starter #27
there's only one little problem with that adaptor 8828,
Is you have to file down the edge as I have done to get it to fit
20200816_102909_1597570610960.jpg Before 20200816_103004_1597570647238.jpg
20200816_103004_1597570647238.jpg 20200816_103004_1597570647238.jpg after
Just take your time when filing down
In the second picture I have managed to grind that end off
After a little while the adaptor fitted in.
 

·
Registered
Joined
·
723 Posts
I used the 8881 splined adaptors with the 4557 4'' offset mounts connected to 7610 Kinetic boards on my 9. The adaptor has a larger hole bore than the holes in the bikes mounting bracket for the OEM pin. I just drilled the bikes mount larger to match the adaptor and fitted a bigger bolt with a shim/spacer to prevent any wiggle. Easy on easy off and they adjust in everyway imaginable to get the right feel for the passenger.

97694203_268830387575836_3105229739753734144_n.jpg 98443991_590529588251934_4000560804121280512_n.jpg 97749011_241570403727144_3174977766667845632_n.jpg
 

·
Registered
Joined
·
16 Posts
So here is the final item all done
So kuryakyn 8828 will fit after filing some of the edging down
dar1800, thanks for all the info on this. Im about to place an order for the 4351 floorboard for the rear. I know KY doesn't make an adapter for this board for the rear but are you saying that all I need is the 8828 adapter and simply file down the small lip at the ends and it will work?
 
21 - 31 of 31 Posts
Top