M109 Rider Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
113 Posts
Discussion Starter · #1 ·
Raw Design is issuing an immediate recall on the M-109 lowering bones. We have checked our records and there are approximatley 50 units sold that were manufactured incorrectly.

There should be a weld on the inside radius between the flat plate and round boss. Your bike should be inspected immediately. These bones are unsafe and must be removed! If your bones do have a weld in this area they are ok and do not need to be replaced. If your bones are faulty, you can get a new set at no charge by callling us or we will refund your money. You must return the old bones.

We will be contacting all customers on record that we know have these, but you can help us get the word out. We really appreciate our customers and ask for your help in locating all these sets!

Sorry if this is a repost.
 

·
Registered
Joined
·
113 Posts
Discussion Starter · #3 ·
I even looked for a minute....guess I shoulda looked for 2 minutes. Thanks Eye.
 
1 - 3 of 3 Posts
Top