M109 Rider Forums banner

1 - 4 of 4 Posts

·
Radio Active Member
2007 Candy Sonoma Red
Joined
·
22,874 Posts
With a socket and very little torque. It's something like 6 ft/lbs, and don't go any more than that or you'll break them. I just tighten them down snug as there's nothing to loosen them once they are installed.

Is that what you're asking?

If you're talking about tightening the springs themselves, do a search for "bluey fix" and include the quotes in the search.
 

·
Registered
Joined
·
114 Posts
Discussion Starter · #3 ·
Yes, thats what I was talking about, thank you. I was doing the bluey fix, hoping that is was the vibration that seemed to be getting worse.
Thanks again.
 

·
Registered
Joined
·
423 Posts
Tighten them to 4 ft. lbs. or 48 in lbs. Ref. Section 11, Pg. 25. in Service Manual.
6mm fastener. :bigthumbsup:
 
1 - 4 of 4 Posts
Top