M109 Rider Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
14 Posts
Discussion Starter · #1 ·
I have a 2007 and the clutch was slipping in 4th and 5th. So i decided to upgrade to the 2011 clutch. I took everything apart. Checked the tube nut and it was tight. Put everything back together and it is worse. I did the oil mod on the center bolt and adjusted it 1 turn off touching. cable has 3 quarters slack. only problem is i used the old wave washer.
I have a ride tomorrow. Help
 

·
Registered
Joined
·
377 Posts
What's worse about it? Not engaging, not disengaging, too hard to pull? Some more details would help us track it down.
 

·
Registered
Joined
·
14 Posts
Discussion Starter · #3 ·
Sorry
Slipping. I think i need to know how the first 3 plates go in. I think i had the wave washer in wrong
 

·
Registered
Joined
·
14 Posts
Discussion Starter · #4 ·
had it in wrong.
Drive plate. the big one with no fibers than wave washer than wave washer plate (small one) than fiber.
Im a rooky again
 
1 - 5 of 5 Posts
Top