M109 Rider Forums banner

1 - 12 of 12 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter · #1 · (Edited)
They for all of the replies, I have located designer. Thank you for all of the welcomes for Forum. I will post picture of my M109R when I get it out of the shop and I am doing a lot of upgrades.
 

·
Registered
Joined
·
5,471 Posts
Well, first and foremost...welcome the Forum. Of course we know where you can purchase a set of those customized stock air intake covers. They are made by one of the members of this great Forum. He goes by the name of Ducks517. He has a plethora of designs already available. However, if you have something specific you would like him to make for you instead, you'll just have to send that design to him, and he will work it up, and let you see and approve his template/draft, before he starts the work. He's also on Facebook under the name Ducks Custom Motorcycle Air Intakes. I had a set made by him some years ago, and they were FLAWLESS.
 

·
Registered
Joined
·
5 Posts
Discussion Starter · #3 ·
Well, first and foremost...welcome the Forum. Of course we know where you can purchase a set of those customized stock air intake covers. They are made by one of the members of this great Forum. He goes by the name of Ducks517. He has a plethora of designs already available. However, if you have something specific you would like him to make for you instead, you'll just have to send that design to him, and he will work it up, and let you see and approve his template/draft, before he starts the work. He's also on Facebook under the name Ducks Custom Motorcycle Air Intakes. I had a set made by him some years ago, and they were FLAWLESS.
Thank You so much and very much appreciate the welcome. Just found this forum and I have a 2013 M109R original owner of bike so I am still customizing it since 2013. I will reach out to him on Facebook
 

·
Radio Active Member
Joined
·
22,681 Posts
Welcome to the forum. 🙋‍♂️ :)
Len has a section in the Vendor forum on here, it's listed as Ducks Covers. It shows he hasn't been on here in 7 months, but if you browse through the posts on there it lists his personal website and also his Facebook site. He's a great guy too.
 

·
Registered
Joined
·
3,398 Posts
Here is a good one.......Len you might want to look into this.

If you do a google search for Ducks Custom Intakes, the top selection google pulls up is Ducks Custom Motorcycle Air Intakes and has his correct http:/www.duckscovers.com link
But if you click on that search it takes you to a online pharmacy that is trying to sell you discount Cialis....LOL

But if you type duckscovers.com directly into the URL bar bypassing the google search the link works and takes you to Lens web page.
Ducks is a legit business and Len does great work, I had him make a set of custom covers for me as well years back.
It seems the link to his site is broken when using the google search at the moment though.
He has a tab on his web page labeled "Cover Pics" where you can see lots of designs he has made or you can contact him to talk about cutting your own custom design as well.

BCS
 

·
Registered
Joined
·
5 Posts
Discussion Starter · #6 ·
Yes
Welcome to the forum. 🙋‍♂️ :)
Len has a section in the Vendor forum on here, it's listed as Ducks Covers. It shows he hasn't been on here in 7 months, but if you browse through the posts on there it lists his personal website and also his Facebook site. He's a great guy too.
I found him on Facebook and giving him my order now, Thank you so much. My bike is still in show adding some more sounds but absolutely wanted to add this to my bike
 

·
Registered
Joined
·
194 Posts
I don't want to highjack the thread but I'd like to get some custom covers made up in the future as well. Will doing so increase the air flow into the bike like adding an aftermarket intake? Can you change up the factor filter behind the customized covers to assist with the air flow? Maybe some K & N filters? I love the covers but would still like the performance increases with an optional intake and a future flash.

Thanks!
 

·
Registered
Joined
·
3,450 Posts
I don't want to highjack the thread but I'd like to get some custom covers made up in the future as well. Will doing so increase the air flow into the bike like adding an aftermarket intake? Can you change up the factor filter behind the customized covers to assist with the air flow? Maybe some K & N filters? I love the covers but would still like the performance increases with an optional intake and a future flash.

Thanks!
IMHO,
by pluging the hole at the back of the OEM salad bowl, through which it is getting the warm air from around the motor, you will be allowing only the cold air through the new open mesh of your newly designed intake. That alone will get you slightly better performance. But this way more dirt will get to your filters and therefore K&N replacements will be more practical, since you can periodically clean them.
 

·
Registered
Joined
·
5,471 Posts
I don't want to highjack the thread but I'd like to get some custom covers made up in the future as well. Will doing so increase the air flow into the bike like adding an aftermarket intake? Can you change up the factor filter behind the customized covers to assist with the air flow? Maybe some K & N filters? I love the covers but would still like the performance increases with an optional intake and a future flash.

Thanks!
Of course, there are some designs that are more open, thereby allowing more air to flow through. So in theory, if you select a design that is more open, you will definitely get more air flow going through to your air box. And yes, you can certainly replace those stock/factory air filters with aftermarket K&N Air Filters, which are supremely better...plus you can wash and reuse the K&N Air Filters.
 
1 - 12 of 12 Posts
Top