M109 Rider Forums banner

1 - 11 of 11 Posts

·
Registered
Joined
·
35 Posts
Discussion Starter · #1 ·
I would like to shorten the reach a little on my M90 about 1inch but I dont want to change brake lines and cables.

Someone suggested to me that the M109 bars may fit on a M90.

Apparently they are slightly more pulled back toward the rider.

Does anyone have some experience with this or know if it will work? Or have any other suggestions.

Please keep in mind that I am not mechanically minded.

Thanks
 

·
Registered
Joined
·
90 Posts
Maybe someone could inform you of the dimensions of the 109 risers and you could switch out with out getting new cables. its worth looking into.
 

·
Registered
Joined
·
3,306 Posts
I would like to shorten the reach a little on my M90 about 1inch but I dont want to change brake lines and cables.

Someone suggested to me that the M109 bars may fit on a M90.

Apparently they are slightly more pulled back toward the rider.

Does anyone have some experience with this or know if it will work? Or have any other suggestions.

Please keep in mind that I am not mechanically minded.

Thanks
I would just keep the bars and attach a M109R and the problem is solved! :clap2:
 

·
Registered
Joined
·
913 Posts
Change your seat. A standard cut gel seat will move you forward about 1". Or you can get a custom seat and add even more foam to the back making you move ever more forward
 
1 - 11 of 11 Posts
Top