M109 Rider Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
752 Posts
Discussion Starter · #1 ·
On the JSD install the red wire is ground. Ground it to the copper / brass colored bolt on the frame. I forgot to take a pic and I am not pulling it apart to take one. Sorry.

If you need help PM me.

This is only on the JSD kit for the M109 from Jeff. The maniac mod I didn't do as I wanted to make it plug and play and unplug and warranty work.

Good luck.
 

·
Registered
Joined
·
752 Posts
Discussion Starter · #3 ·
Yes, right by it on the outside of the frame. Just remember to run the ground wire to the bolt by going towards the back of the bike instead of the front. That will keep it away from the header.

Your welcome ppridgen1. The install is so incredibly cake.
 
1 - 3 of 3 Posts
Top