M109 Rider Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
364 Posts
That's why I've had a pair of the vents laying around here for two years and haven't installed them. I've seen some that installed nice and some that just looked like crap.

The two sided tape won't hold it down enough. If it were me, I'd cut as much of the vent off as I could so it would be more pliable, and epoxy it in place. You can get some small clamps in there to hold it down while the epoxy dries.
Like Zoom said. I backed mine with mesh screen and back lit them with a red LED pod.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top