M109 Rider Forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
33 Posts
Discussion Starter · #1 ·
Just an FYI for you guys. My GiPro was messing up (wrong gear indicated and sporatic rpm. When I went to re-learn the gears nuetral showed 5th gear so it would not go into learn mode.

Gotta give two thumbs up to Nubert (from Healtech), received an email from him on a Sunday helping me out! Told me to disconnect the wires and see if the prongs were still in the right spot. Long story short, took the wires apart and there was water sitting in the connectors.

If your neutral shows 5th gear, just keep an eye out for water in the connectors. Cleared the water and everything is fine now.

Brian
 

·
Registered
Joined
·
367 Posts
Thanks Man good to KNow
 

·
Registered
Joined
·
16,261 Posts
How did water get in the connector?
 

·
Registered
Joined
·
33 Posts
Discussion Starter · #4 ·
My guess is the riding in the rain, or washing the bike. I know they are supposed to be waterproof. I put a small balloon around both connectors and zip tied the ends.....should keep all the water out in the future.
 
1 - 4 of 4 Posts
Top