M109 Rider Forums banner
1 - 6 of 6 Posts

·
Registered
Joined
·
229 Posts
Discussion Starter · #1 ·
I recently replaced my front blinker lense with clear lenses and went with the 1157 amber bulbs. After changing the bulbs, my right blinker blinks at the "standard" fast rate while the left blinks slower. I really don't mind the fast blinker of stock bikes as I feel they are more anttention-grabbing to cagers. Any ideas on what the solution would be to get the left blinking at the fast rate?:dontknow:
 

·
Registered
Joined
·
3,127 Posts
clairifacation needed. You put a 1157 bulb into the stock blinker housing? If so then you must have filed off one of the tabs correct? If this is so then could one have a better ground then the other causing for different blink rates?
 

·
Registered
Joined
·
5,204 Posts
If they are standard bulbs then one of them is bad or not making good connection. If they are LEDs they should both blink fast. You can't really make the standard bulb blink fast unless it's a bad bulb or connection.
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top