M109 Rider Forums banner
1 - 5 of 5 Posts

· Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
Am new to 1o9, want to know if i can change out final drive ( like i did for my vtx) hiway rpms lower coast to coast rides saved lots engine ware and gas not a kid any more willing to lose off the line punch. THANX
 

· Radio Active Member
2007 Candy Sonoma Red
Joined
·
23,859 Posts
:welcome: to the forum. :D

Nothing out there. Some thought this bike used the same final drive as the C90 and there isn't any for that either. I don't think it was ever confirmed if the 109 has the same final drive as the C90 or not.

Who made the ones for the VTX? I didn't know you could swap those out either.
 

· Registered
Joined
·
2 Posts
Discussion Starter · #5 ·
swap

Thanx will look into c90 the vtx 1300 has higher stack than the 1800 500$ later I had droped 400 rpm could cruise 70mph with rpm of 2600 , will have to pull up some info on c90 final thinking about denver ride late summer first long 109 ride
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top