M109 Rider Forums banner
1 - 6 of 6 Posts

·
Radio Active Member
Joined
·
27,699 Posts
Frequently asked questions.

Your answer is in that link. 9 chances out of 10, when you removed your air box, you didn't plug something back in.
I did not remove the air box when I did mine. :evil: But check to see what code you have causing the FI light to come on. The procedure is also in the link Hink stated.
 

·
Radio Active Member
2007 Candy Sonoma Red
Joined
·
23,137 Posts
I didn't pull the air box for mine either, but I did remove the air filter boxes and tubes. Make sure you didn't unplug the TPS sensor connector by accident when removing the right side box, the connector is right there and easy to snag.

Check the codes first as suggested, that will point you in the right direction.
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top