M109 Rider Forums banner

1 - 7 of 7 Posts

·
Registered
Joined
·
10 Posts
Discussion Starter · #1 ·
Hi everyone. I'm from downunder aus with a LE 2008 9er. Just ordered a cobra fi2000r. Have debaffled pipes only. Anyone with similar setup to offer settings advice? All posts appreciated. Thanks.
 

·
Radio Active Member
2007 Candy Sonoma Red
Joined
·
22,869 Posts
With only debaffled pipes I would start out with just leaving it on the stock setting out of the box.
:agree: and that may be a little rich. The stock setting is supposed to be for a bike with aftermarket exhausts, so if it runs rich tweak the 1st and 2nd pots down 1/2 to 1 full number. Or if it runs smooth leave it as it is.
 

·
Radio Active Member
Joined
·
27,669 Posts
:agree: and that may be a little rich. The stock setting is supposed to be for a bike with aftermarket exhausts, so if it runs rich tweak the 1st and 2nd pots down 1/2 to 1 full number. Or if it runs smooth leave it as it is.
:agree: Mine is still at the stock setting with K&N's, de baffled and GI Pro. Runs good. :bigthumbsup:
 

·
Registered
Joined
·
343 Posts
hay dick licker i told you the best settings for it dirt bag
 
1 - 7 of 7 Posts
Top