M109 Rider Forums banner
1 - 1 of 1 Posts

474 Posts
Discussion Starter · #1 ·
Hey guys, I just got my bike back from the dealer after getting it's 1000 K service and was wondering about the clutch play. When I got the bike new, it had a little bit of play when the handle was all the way out about a 1/2 " before you started to feel resistance, but today when I got the bike back and rode it home, it seems that they adjusted it so that there is no play whatsoever when it's all the way out. Is that ok or should I be concerned about it?

It seems like the friction zone on the clutch is about 3/4 to fully out whereas before it was about 1/2 way to 3/4 of the way out.

My concern is that if there is no play does that mean that the clutch may not fully engage? I beat on it on the way home and didn't really feel any slippage when I gave it hard in 1st and 2nd gear.....
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.