I have been reading through previous posts that go back quite a while about the dreaded front engine mounts,,,
I tested my mounts by holding the back and front breaks and rocking the engine with the clutch, true to form the engine rocks to the point that when it rocks forwards I can hear a clunk or metal mount to Metal bracket,, so my assumption is the front mounts are buggered,,, I did notice they were worn as when riding normally there is a lot of play,
Now suggestions on here vary from person to person, some said to use rear mounts as they are the same but stronger or stiffer material, others say that it must be the top rear mount as it is stronger and not the bottom rear mount as it is soft as the front.... It has been mentioned that someone created a nylon type bush which will outlast the rubber mounts,,,
So you see my dilemma ? So what is the best advice on these mounts once and for all?
Any advice greatly appreciated,,