Hey folks, need some advice. I have a 2014 M109R. It bottomed out over a bump and cracked the oil sump. The oil sump is now repaired and back on. I need advice on how much oil to pour in. The manual says 3.6 litres for a usual oil plus filter change, but I suspect it may need more this time as the sump was removed and oil dripped out. Is 4 litres a good ballpark to start with? I will check the oil by the 15/3 method after it has warmed up and add more if required, but want to avoid oil puking out of the left air filter. Thanks in advance.