Arnott Introduces Handlebar-Mounted Pushbutton Controller with LED Pressure Gauge
Results 1 to 2 of 2

Thread: Arnott Introduces Handlebar-Mounted Pushbutton Controller with LED Pressure Gauge

  1. #1
    Member
    Join Date
    Mar 2014
    Location
    Merritt Island, fl
    Posts
    21

    Default Arnott Introduces Handlebar-Mounted Pushbutton Controller with LED Pressure Gauge

    Arnott Motorcycle Air Suspension -- the leader in True Onboard Adjustable Air Suspension kits for motorcycles -- announces the introduction of a handlebar-mounted two-button switch with digital display designed to enable riders to quickly adjust Arnott Motorcycle Air Suspension Shocks and easily see the pressure value in pounds per square inch (PSI).


    The waterproof assembly mounts to the handlebar clutch perch and has separate buttons to inflate or deflate the air suspension system and a blue LED air pressure display.

    The black inflation kit, K-3114, comes complete with a high-impact aluminum housing finished in black Type III Hard Anodization, which is completely sealed off from outside elements.

    The chrome inflation kit, K-3115, comes complete with a high-impact aluminum housing finished in chrome, which is completely sealed off from outside elements.

    The switch includes an attached wiring harness pre-configured with the necessary connectors. The kit also includes a pressure transducer which attaches to the Arnott manifold, additional tubing, airline fittings, spade connectors and wire taps for connecting the unit to the motorcycle's ignition switch wire.

    K-3114 and K-3115 retail for $299 each and are backed by Arnott's Limited 1-Year Warranty.

  2. #2
    Very Active Member IKNOWP's Avatar
    Join Date
    May 2011
    Location
    HOUSTON
    Posts
    408

    Default

    Looked on your site and looks good. Little pricy though. Trying to think of a way to do a dual gauge set up all in one. Guess this would be plan "B". But you did give a ideal with the smaller pressure sensors.
    Chrome frame,Chrome belly pan,Chrome DLP swingarm, 10" wheel w/300 Avon,Chrome one piece fork tubes,Chrome front and rear brake calipers,Chrome Galfer wave brake rotors,Chrome Sumo-x 9 deg trees, 26" front wheel, Front and Rear air ride, Corbin heated seats, HID projection headlamp conversion, Six channel Led system.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •