REVO M109R-D6
Results 1 to 11 of 11

Thread: REVO M109R-D6

  1. #1
    Supporting Vendor Rainey5230's Avatar
    Join Date
    Sep 2007
    Location
    Taiwan
    Posts
    667

    Red face REVO M109R-D6

    REVO M109R-D6

    Please let me introduce you our REVO 2017 representative works, the REVO M109R-D6, D6 refers to Dual 6” Exhaust, is our newest development .

    D6 we still use the 2015 BOSS red and black colors and the headlight we use the REVO Bull headlight which the signal lights and neutral lights are set behind the headlights. One important thing is that how we combine the headlight and the signal together, those small details are the focus of the design and killing our brain cells to solve them. Because the Bull headlights that we have to sacrifice the tachometer to get the simplified shape design. For the radiator shield and cover, we use L&M enclosing kit to increase the muscular look, also the openings can bring more air for more effective cooling, and the bottom part is more sharp shapes that brings out the murderous in it. In the rear part, we use SUMO-X kit and modified with the anode treatment. Later on we will add more parts to the tail parts such as taillights, license holder etc. That makes the rear section become more concise and neat looking.

    We also notice that a popular use of the direction sequential effect signal lights so we use the one from German but it does not come cheap.
    Another section we focus on is the power on the D6. We carefully designed the six-inch duel exhaust that brings this bike with incomparable momentum, and extremely tough look on the tail. It also come with 300 tires, in addition to the exhaust there are also Cobra air intake system and gas supply computer, which increase about 20 horsepower to the bike. We also use different wheel to match the bike, the front wheel is 5JX18 and the rear is 10JX18 specifications are 150/70 R18 and 300/35 R18, there are made by COASTAL MOTO. The wheels have turbine kind of looking even when standing still they still look quite dynamic. The extinction black gives the bike a strong chill atmosphere. We are also the first in the industry that use the GSX-R1000’s Brembo M50 calipers at front and the special designed four-piston caliper for 300 tires.
    Specific design for the customer, we selected the VTX handle bar that allows us to move the bar back 2-inchs to fit the customer’s request and we also hidden all the wires inside the handle bar that gives it a clean looking. The grip is form AVON that gives better handle feeling and use 3D modeling rear view mirrors to create sporty feeling and to match the body’s muscular lines. For the better use, we change the clutch to REVO hydraulic clutch. Because the height of the customer we use footsteps from England that is slightly backward to make up the height problem.

    The overall design of REVO D6 is the coordination of the whole bike. It cannot be any unexpected place, and the various parts and style must be consistent. We choose the same coating with the original color because we do not want to use the fancy luxury pant, which would overtake the theme we created. When a modified bike lost performance it should had, that becomes just a decoration in an exhibition or a showroom then it is meaningless to modify it. That is not what an American Muscle Motorcycle would be, and it definitely is not the customer want.

    Click image for larger version. 

Name:	20449314_10209937215163059_6994259818615000787_o.jpg 
Views:	184 
Size:	78.1 KB 
ID:	366113Click image for larger version. 

Name:	20507666_10209937214363039_2584516094807807142_o.jpg 
Views:	155 
Size:	82.1 KB 
ID:	366121Click image for larger version. 

Name:	20507777_10209937218843151_7876806232035209211_o.jpg 
Views:	145 
Size:	106.6 KB 
ID:	366129Click image for larger version. 

Name:	20543551_10209937213603020_3870665558591887371_o.jpg 
Views:	174 
Size:	79.7 KB 
ID:	366137Click image for larger version. 

Name:	20545577_10209937216443091_1159409466304810513_o.jpg 
Views:	129 
Size:	85.3 KB 
ID:	366145

  2. Remove Advertisements
    M109Riders.com
    Advertisements
     

  3. #2
    Very Active Member Bering_C_Sparky's Avatar
    Join Date
    Jun 2017
    Location
    Florida
    Posts
    2,876

    Default

    Looks pretty mean......if a 9 and a VMax had a baby it would grow to look similar to this bike.

  4. #3
    Very Active Member
    Join Date
    Aug 2017
    Location
    uk
    Posts
    175

    Default

    eagerly awaiting a sound clip if that is an unequal length downpipe 2 into 2

  5. Remove Advertisements
    M109Riders.com
    Advertisements
     

  6. #4
    Very Active Member JUDAH-9's Avatar
    Join Date
    Nov 2009
    Location
    San Antonio, TX
    Posts
    4,285

    Default

    There’s multiple things regarding that exhaust I don’t care for.

  7. #5
    Very Active Member FlyingCircus's Avatar
    Join Date
    Dec 2016
    Location
    Saskatchewan Canada
    Posts
    2,699

    Default

    I like it



    Sent from my SM-N920W8 using Tapatalk

  8. #6
    Very Active Member Poseidon's Avatar
    Join Date
    Apr 2014
    Location
    Chesterfield, VA
    Posts
    4,882

    Default

    There are things I like and things I don't like. First, I don't like the fact that it makes the 9 a 1-up bike as it would prevent passenger pegs from being installed. I'm also not crazy about the design of the crossover pipe. There are too many direction changes for it to flow very well.

    I do like how it balances the look of the bike with pipes on both sides. I also like how the head pipes flow around the motor and are tight to the bike. There have been a couple other exhaust systems that have done that as well tho. The upsweep of the pipe, even though it blocks the passenger pegs, should keep the exhaust high enough not to scrap it the twisties.

  9. #7
    Very Active Member Hogan109r's Avatar
    Join Date
    Dec 2013
    Location
    Myrtle beach sc and cornelius nc
    Posts
    392

    Default

    Quote Originally Posted by Poseidon View Post
    There are things I like and things I don't like. First, I don't like the fact that it makes the 9 a 1-up bike as it would prevent passenger pegs from being installed. I'm also not crazy about the design of the crossover pipe. There are too many direction changes for it to flow very well.

    I do like how it balances the look of the bike with pipes on both sides. I also like how the head pipes flow around the motor and are tight to the bike. There have been a couple other exhaust systems that have done that as well tho. The upsweep of the pipe, even though it blocks the passenger pegs, should keep the exhaust high enough not to scrap it the twisties.
    I agree with Sean
    And on the cross "under" pipe is their plenty of room
    under their ?

  10. #8
    Very Active Member cbxer55's Avatar
    Join Date
    Feb 2009
    Location
    Oklahoma City
    Posts
    5,315

    Default

    Late to this thread. If this exhaust becomes available, I'll be getting one. Don't care about the passenger thing, my bike has never had a back seat and I removed the back pegs and tossed them in the round-open-top-file years ago. Not buying new ones. Also not too concerned about any small loss of power. ANd if the pipe on the left doesn't flow freely, who cares, there is still the pipe on the right. I am sure it's a 2-into-1-into 2, like my B-King is. B-King is actually a 4-into-2-into-1-into-2. The Yoshimura mufflers on that bike are not the same, the left one is smaller than the right one. But it matters not since all the exhaust converges into one pipe before splitting into the two mufflers.

    I dig the upsweep of the two mufflers. Seen the YouTube video and commented on it already. Awesome looking exhaust. Hurry up and make them already.
    SILVER 2006 M109R.
    BLACK 2008 B-KING


  11. #9
    Very Active Member FlyingCircus's Avatar
    Join Date
    Dec 2016
    Location
    Saskatchewan Canada
    Posts
    2,699

    Default

    Quote Originally Posted by cbxer55 View Post
    Late to this thread. If this exhaust becomes available, I'll be getting one. Don't care about the passenger thing, my bike has never had a back seat and I removed the back pegs and tossed them in the round-open-top-file years ago. Not buying new ones. Also not too concerned about any small loss of power. ANd if the pipe on the left doesn't flow freely, who cares, there is still the pipe on the right. I am sure it's a 2-into-1-into 2, like my B-King is. B-King is actually a 4-into-2-into-1-into-2. The Yoshimura mufflers on that bike are not the same, the left one is smaller than the right one. But it matters not since all the exhaust converges into one pipe before splitting into the two mufflers.

    I dig the upsweep of the two mufflers. Seen the YouTube video and commented on it already. Awesome looking exhaust. Hurry up and make them already.
    I'm with you. I know I did say no bags and recanted on that but no back seat ever or you can call me a pussy whipped snow flake if you want. Or anything else cause that will never happen.

    Sent from my LG-H933 using Tapatalk

  12. #10
    Very Active Member cbxer55's Avatar
    Join Date
    Feb 2009
    Location
    Oklahoma City
    Posts
    5,315

    Default

    Quote Originally Posted by FlyingCircus View Post
    I'm with you. I know I did say no bags and recanted on that but no back seat ever or you can call me a pussy whipped snow flake if you want. Or anything else cause that will never happen.

    Sent from my LG-H933 using Tapatalk
    Well, did you remove the passenger pegs and deep six them as well? If you did, it'll be hard to go back without spending some money. I have a back seat for my bike, came with the gel seat, so there it sits still in the box it came in. But no pegs, they're in a landfill somewhere.

    Hopefully the pegs aren't needed to hang the mufflers off! Like on some sport bikes, the cans hang off the peg mounts.
    SILVER 2006 M109R.
    BLACK 2008 B-KING


  13. #11
    Very Active Member FlyingCircus's Avatar
    Join Date
    Dec 2016
    Location
    Saskatchewan Canada
    Posts
    2,699

    Default

    Kept the pegs and the hardware in case anyone needs them

    Sent from my LG-H933 using Tapatalk

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •