Water temp gauge question
Page 1 of 2 12 LastLast
Results 1 to 30 of 37

Thread: Water temp gauge question

  1. 09-08-2016 #1
    josey88
    josey88 is offline
    Very Active Member
    Join Date
    May 2016
    Location
    Port st Lucie, Florida
    Posts
    951

    Default Water temp gauge question

    Ok... I find really amazing that two things that are very important on motorcycle engines are totally omitted from the instrument panel on the immense majority of motorcycles , with a very few exceptions : 1) a voltmeter , and , 2) a water temp gauge ... why , I have no idea . I want to know how the bike is charging , so
    I solved the voltmeter omission already by ordering one . I also want to know if the bike is running hot or not , so , the second one , a water temp gauge (not an oil temp gauge) which to me is also important is , and it seems to be , a little more difficult , so I need to ask where I can get one and where can it be installed in a 109r engine , if such a thing is possible ?
    Thanks
    Last edited by josey88; 09-08-2016 at 02:24 PM.
    Reply With Quote Reply With Quote
  2. Sponsored Links Remove Advertisements
    M109Riders.com
    Advertisements
     
  3. 09-08-2016 #2
    thevili
    thevili is offline
    Very Active Member thevili's Avatar
    Join Date
    Jan 2009
    Location
    Fergus, Ontario, Canada
    Posts
    3,349

    Default

    There are specialized gauges for that, for example "Depo 4 in 1".. this one is from Europe, but I am sure Google will hep you find similar one in USA..

    https://www.google.sk/search?q=depo+...sQsAQIIA&dpr=1
    M109R 2011 Black, 2" lowering bones, air horn, flash to pass garage door opener, Brakeaway Cruise Control, V-stream windshield, Back Off Brake hold, OEM engine guards, Cobra One Piece rear luggage carrier, Cobra Tri Pro 2 in 1 Black exhaust, Cobra FI 2000 AT fuel processor.
    Reply With Quote Reply With Quote
  4. 09-08-2016 #3
    josey88
    josey88 is offline
    Very Active Member
    Join Date
    May 2016
    Location
    Port st Lucie, Florida
    Posts
    951

    Default

    I found this one on ebay that can work for me http://www.ebay.com/itm/321267701399
    This gauge will monitor oil , water temp and voltage but it comes with 2 sensors , one for the oil and the other for the water temp , but my concern is find where to install the two sensors on a M109r engine .
    Does anybody knows where the sensors can be installed /screwed in on the block or any part of the engine ? besides the dipstick , of course . If I can install the sensors I will order this gauge that will allow me to get oil temp, water temp and voltage , all in one .
    Reply With Quote Reply With Quote
  5. Sponsored Links Remove Advertisements
    M109Riders.com
    Advertisements
     
  6. 09-08-2016 #4
    phatm9
    phatm9 is offline
    Very Active Member phatm9's Avatar
    Join Date
    Jun 2010
    Location
    chicago
    Posts
    1,535

    Default

    I have a digital zenith air gauge which also has voltage display on it which I have my for air ride-the 1st 10 seconds shows my voltage then it displays my air ride psi- I also have a radiator from Rainy and he sent the radiator sensor which displays the radiator temp it is made by Koso- this is it


    Sent from my LG-H901 using Tapatalk
    Reply With Quote Reply With Quote
  7. 09-08-2016 #5
    Stromma
    Stromma is offline
    Member Stromma's Avatar
    Join Date
    Jul 2015
    Location
    Sweden
    Posts
    25

    Default Depo 4 in 1

    If anyone is thinking of getting one of these,buy the one with the clear lens !
    Reply With Quote Reply With Quote
  8. 09-08-2016 #6
    josey88
    josey88 is offline
    Very Active Member
    Join Date
    May 2016
    Location
    Port st Lucie, Florida
    Posts
    951

    Default

    Guys, I know ... my concern is not the gauge itself , which it can be found on ebay , but the sensors installation locations on the engine .
    Can anybody detail where the sensor for the oil temp and the sensors for the water temp are mounted /screwed in ?
    I would like to know where on the engine or radiator I can install the sensors ... that is my concern
    Reply With Quote Reply With Quote
  9. 09-09-2016 #7
    phatm9
    phatm9 is offline
    Very Active Member phatm9's Avatar
    Join Date
    Jun 2010
    Location
    chicago
    Posts
    1,535

    Default

    Here is sensor on radiator


    Sent from my LG-H901 using Tapatalk
    Reply With Quote Reply With Quote
  10. 09-09-2016 #8
    josey88
    josey88 is offline
    Very Active Member
    Join Date
    May 2016
    Location
    Port st Lucie, Florida
    Posts
    951

    Default

    I see... well, the stock radiator (mine) doesn`t come with the intake needed to install a sensor , so , I guess that unless I would be willing to replace the radiator from Rainey and spend $500.00 on it or find another solution , the water temp gauge is out of the equation , lol...
    Reply With Quote Reply With Quote
  11. 09-09-2016 #9
    phatm9
    phatm9 is offline
    Very Active Member phatm9's Avatar
    Join Date
    Jun 2010
    Location
    chicago
    Posts
    1,535

    Default

    Well my cousin has stock radiator and he has Rainey oil/ water sensor I believe when he installed it he just drill and tapped to fit the water sensor in the stock radiator
    Reply With Quote Reply With Quote
  12. 09-09-2016 #10
    josey88
    josey88 is offline
    Very Active Member
    Join Date
    May 2016
    Location
    Port st Lucie, Florida
    Posts
    951

    Default

    Quote Originally Posted by phatm9 View Post
    Well my cousin has stock radiator and he has Rainey oil/ water sensor I believe when he installed it he just drill and tapped to fit the water sensor in the stock radiator
    Still, it would be a major undertaking . Taking the radiator out , and drilling/welding a threaded base to screw in the sensor ... unless you have a problem with the radiator and absolutely need to either fix it or replace it , it would not make much of a sense to go thru all of that just to install a water sensor ... not in my humble opinion , anyway
    Last edited by josey88; 09-09-2016 at 02:10 PM.
    Reply With Quote Reply With Quote
  13. 09-09-2016 #11
    SKIDMARK
    SKIDMARK is offline
    Very Active Member SKIDMARK's Avatar
    Join Date
    Feb 2012
    Location
    LAND OF THE LONG WHITE SMOKE CLOUD,.NEW ZEALAND
    Posts
    9,224

    Default

    Quote Originally Posted by josey88 View Post
    Still, it would be a major undertaking . Taking the radiator out , and drilling/welding a threaded base to screw in the sensor ... unless you have a problem with the radiator and absolutely need to either fix it or replace it , it would not make much of a sense to go thru all of that just to install a water sensor ... not in my humble opinion , anyway
    Cut 1 of the Rad hoses, Slip in a short piece Steel Tubing with Sensor attached, Hose clamps and Done.
    Reply With Quote Reply With Quote
  14. 09-09-2016 #12
    SKIDMARK
    SKIDMARK is offline
    Very Active Member SKIDMARK's Avatar
    Join Date
    Feb 2012
    Location
    LAND OF THE LONG WHITE SMOKE CLOUD,.NEW ZEALAND
    Posts
    9,224

    Default

    Similar to this

    Reply With Quote Reply With Quote
  15. 09-09-2016 #13
    josey88
    josey88 is offline
    Very Active Member
    Join Date
    May 2016
    Location
    Port st Lucie, Florida
    Posts
    951

    Default

    Hey, that is very doable ... I can do that .
    Thanks , Skid
    Reply With Quote Reply With Quote
  16. 09-09-2016 #14
    SKIDMARK
    SKIDMARK is offline
    Very Active Member SKIDMARK's Avatar
    Join Date
    Feb 2012
    Location
    LAND OF THE LONG WHITE SMOKE CLOUD,.NEW ZEALAND
    Posts
    9,224

    Default

    Find the dia of hose. Type x mm inline radiator sensor to google images. Heaps to choose from. Used on 4 wheelers

    Ride All You Can. Life Is Short.
    Reply With Quote Reply With Quote
  17. 09-09-2016 #15
    josey88
    josey88 is offline
    Very Active Member
    Join Date
    May 2016
    Location
    Port st Lucie, Florida
    Posts
    951

    Default

    Quote Originally Posted by SKIDMARK View Post
    Find the dia of hose. Type x mm inline radiator sensor to google images. Heaps to choose from. Used on 4 wheelers

    Ride All You Can. Life Is Short.
    We are talking about the upper hose , right ?
    Reply With Quote Reply With Quote
  18. 09-09-2016 #16
    TRod
    TRod is offline
    Very Active Member TRod's Avatar
    Join Date
    Sep 2010
    Location
    McPherson, KS
    Posts
    6,619

    Default

    Quote Originally Posted by josey88 View Post
    We are talking about the upper hose , right ?
    It would need to be the upper hose. The lower would be after the radiator. I think you want to know after the engine and before the radiator.

    If I'm being honest, a water temp gauge is a waste of time. It provides nothing more than an additional distraction 99.999999999% of the time.
    Last edited by TRod; 09-09-2016 at 09:49 PM.
    Reply With Quote Reply With Quote
  19. 09-09-2016 #17
    josey88
    josey88 is offline
    Very Active Member
    Join Date
    May 2016
    Location
    Port st Lucie, Florida
    Posts
    951

    Default

    Quote Originally Posted by TRod View Post
    It would need to be the upper hose. The lower would be after the radiator. I think you want to know after the engine and before the radiator.

    If I'm being honest, a water temp gauge is a waste of time. It provides nothing more than an additional distraction 99.999999999% of the time.
    I am just thinking on how to prevent the bike from overheating , if that is possible .
    I live in Florida , and , man , the heat here (specially this summer in particular ) is nothing short of brutal because of the humidity , and it is 10 months at year ...a little bit more friendly after the crushing summer months are gone , but humid as hell , all the time . There is still 90 degrees outside during the day plus the humidity , and we are on September already .
    So, I would like to have a gauge that more or less will let me know how things are , heat related .
    Same with the voltage : something as important as a voltmeter in a motorcycle ( which it would let you stranded very fast on the road if there is a regulator problem ,etc) it is not included on the panel gauges of practically any bike , except the luxury line of Harleys ... why , I just can`t see the logic of it .
    So, I bought a voltmeter for an irrisory cost , installed it and now I am happy ; I can check what is going on in my bike `s electrical system .
    I am applying the same reasoning to a water temp gauge , lol...
    Last edited by josey88; 09-09-2016 at 10:47 PM.
    Reply With Quote Reply With Quote
  20. 09-09-2016 #18
    M109Dreamer
    M109Dreamer is offline
    Very Active Member M109Dreamer's Avatar
    Join Date
    Jul 2008
    Location
    Forney, TX
    Posts
    6,826

    Default

    Ive ridden the last 7 years in AZ with 115+ degrees and havent had a problem. I kinda got used to knowing when to expect the fan to kick on. Which would usually happen in slower/stop and go traffic. Its a dry heat but the thermostat doesnt differentiate with dry or humid air. Its all based on temp only. If your really worried about overheating you could just pull the thermostat and test each year.

    Sent from my SAMSUNG-SM-G920A using Tapatalk
    Reply With Quote Reply With Quote
  21. 09-10-2016 #19
    TRod
    TRod is offline
    Very Active Member TRod's Avatar
    Join Date
    Sep 2010
    Location
    McPherson, KS
    Posts
    6,619

    Default

    Quote Originally Posted by josey88 View Post
    I am just thinking on how to prevent the bike from overheating , if that is possible .
    I live in Florida , and , man , the heat here (specially this summer in particular ) is nothing short of brutal because of the humidity , and it is 10 months at year ...a little bit more friendly after the crushing summer months are gone , but humid as hell , all the time . There is still 90 degrees outside during the day plus the humidity , and we are on September already .
    So, I would like to have a gauge that more or less will let me know how things are , heat related .
    Same with the voltage : something as important as a voltmeter in a motorcycle ( which it would let you stranded very fast on the road if there is a regulator problem ,etc) it is not included on the panel gauges of practically any bike , except the luxury line of Harleys ... why , I just can`t see the logic of it .
    So, I bought a voltmeter for an irrisory cost , installed it and now I am happy ; I can check what is going on in my bike `s electrical system .
    I am applying the same reasoning to a water temp gauge , lol...
    A gauge isn't going to prevent the bike from overheating. It will just bug the crap out of you as it constantly goes up and down. You have an idiot light for a reason and there's a pressure cap that will blow off if it gets too hot.

    I agree on the volt gauge. But the temp gauge is just not needed.
    Reply With Quote Reply With Quote
  22. 09-10-2016 #20
    SKIDMARK
    SKIDMARK is offline
    Very Active Member SKIDMARK's Avatar
    Join Date
    Feb 2012
    Location
    LAND OF THE LONG WHITE SMOKE CLOUD,.NEW ZEALAND
    Posts
    9,224

    Default

    Way to advise him to give up. Anyone lend him a rope as well? Just do it bro. You want a gauge you just do it. Jeezus whats with the criticism T.

    Ride All You Can. Life Is Short.
    Reply With Quote Reply With Quote
  23. 09-10-2016 #21
    josey88
    josey88 is offline
    Very Active Member
    Join Date
    May 2016
    Location
    Port st Lucie, Florida
    Posts
    951

    Default

    It is ok guys , I really appreciate the different points of view . I am new at the bike world , so , suggestions and advice from experienced riders is a very valuable thing .
    I will be doing more research and more thinking on this water temp thing . There is no hurry . Most important for me was the voltmeter , and it is installed already . The bike has a powerful fan and it works fine ... it is just a concern on my part , which may be because I think too much or I worry too much , lol...
    Reply With Quote Reply With Quote
  24. 09-10-2016 #22
    TRod
    TRod is offline
    Very Active Member TRod's Avatar
    Join Date
    Sep 2010
    Location
    McPherson, KS
    Posts
    6,619

    Default

    Quote Originally Posted by SKIDMARK View Post
    Way to advise him to give up. Anyone lend him a rope as well? Just do it bro. You want a gauge you just do it. Jeezus whats with the criticism T.
    There is this place. Where the sun doesn't normally shine. That's where you can put it.
    Reply With Quote Reply With Quote
  25. 09-10-2016 #23
    Big-B
    Big-B is offline
    Very Active Member Big-B's Avatar
    Join Date
    Jul 2010
    Location
    MoCo Maryland
    Posts
    16,213

    Default

    Quote Originally Posted by TRod View Post
    A gauge isn't going to prevent the bike from overheating. It will just bug the crap out of you as it constantly goes up and down. You have an idiot light for a reason and there's a pressure cap that will blow off if it gets too hot.

    I agree on the volt gauge. But the temp gauge is just not needed.
    Agree. Imo, if the bike overheats, the temp lite will come on. Doesn't matter how hot it gets. As soon as you see that lite come in, pull over and shut it down. Same for the oil lite.

    Sent from my SM-N920V using Tapatalk

    IT'S NOT ABOUT HOW FAST YOU GET THERE, IT'S ABOUT THE RIDE ITSELF. TAKE YOUR TIME AND ENJOY IT!!
    Reply With Quote Reply With Quote
  26. 09-10-2016 #24
    Weedahoe
    Weedahoe is offline
    Very Active Member Weedahoe's Avatar
    Join Date
    Aug 2014
    Location
    Albany GA
    Posts
    991

    Default

    Like you, i wanted a temp gauge and like said above, i was going to use that rad hose coupler but i just flushed all my coolant abd run straight water with purple ice. I live in south ga so i get it.
    Reply With Quote Reply With Quote
  27. 09-12-2016 #25
    shrk352
    shrk352 is offline
    Very Active Member shrk352's Avatar
    Join Date
    Apr 2014
    Location
    Michigan
    Posts
    164

    Default

    I belive you are looking for this. http://www.meancycles.com/store/part...?partID=223332
    Reply With Quote Reply With Quote
  28. 09-13-2016 #26
    josey88
    josey88 is offline
    Very Active Member
    Join Date
    May 2016
    Location
    Port st Lucie, Florida
    Posts
    951

    Default

    Quote Originally Posted by shrk352 View Post
    I belive you are looking for this. http://www.meancycles.com/store/part...?partID=223332
    Yes, that is exactly what I would like .
    I emailed Larry at revo and he tells me that the kit comes with everything , sensors, T hose adapters , etc .
    This thing is very high quality stuff and will do voltmeter , oil and water temp .
    Reply With Quote Reply With Quote
  29. 09-14-2016 #27
    josey88
    josey88 is offline
    Very Active Member
    Join Date
    May 2016
    Location
    Port st Lucie, Florida
    Posts
    951

    Default

    Quote Originally Posted by shrk352 View Post
    I belive you are looking for this. http://www.meancycles.com/store/part...?partID=223332
    I just ordered it . I really like it , so I bought it . Now to wait at least a couple of weeks for delivery
    Reply With Quote Reply With Quote
  30. 09-14-2016 #28
    SKIDMARK
    SKIDMARK is offline
    Very Active Member SKIDMARK's Avatar
    Join Date
    Feb 2012
    Location
    LAND OF THE LONG WHITE SMOKE CLOUD,.NEW ZEALAND
    Posts
    9,224

    Default

    Quote Originally Posted by josey88 View Post
    I just ordered it . I really like it , so I bought it . Now to wait at least a couple of weeks for delivery


    Ride All You Can. Life Is Short.
    Reply With Quote Reply With Quote
  31. 09-14-2016 #29
    josey88
    josey88 is offline
    Very Active Member
    Join Date
    May 2016
    Location
    Port st Lucie, Florida
    Posts
    951

    Default

    Also, while I am at it , I`ll flush the system with distilled water and replace the coolant on the bike . I called the Suzuki dealer and they don`t have the Suzuki coolant but they use the Honda coolant , type 2 , called HP Coolant , with no silicates . It is already 50/50 mixed , it is also blue , and according to the guys at Suzuki , it is the same exact thing as the Super long life . I would be needing 3 quarts ... around $24.00 plus tax . I would be picking it up later on the week .
    Boy , am I going to be busy with this thing , lol...
    Reply With Quote Reply With Quote
  32. 09-14-2016 #30
    shrk352
    shrk352 is offline
    Very Active Member shrk352's Avatar
    Join Date
    Apr 2014
    Location
    Michigan
    Posts
    164

    Default

    Glad I could help.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

-->
 
Terms of Use
Copyright
Privacy Policy