M109 Rider Forums banner

Question for those with the Yanashiki short kickstand

1K views 6 replies 5 participants last post by  k109 
#1 ·
So I bought one of these to go with my air ride and changing it out isn't any issue but it doesn't even come close to touching the kickstand switch. There is a small screw and I'm guessing it is supposed to come with a bracket or maybe I'm supposed to fabricate one?

So for those with the Yanashiki short kickstand, how did you make it work. I know I can bypass the switch but I would rather have it working as it should be.
 
#6 ·
It not the screw the hits the switch it's the small bar that stick off the back of stand if I am right you need to put the screw all the way in that's what I did on mine works fine will try to take pic
 
#7 ·
The screw is only there to stop the kickstand from hitting the bike stew it in like I said then adjust from there on how far away from bike you want stand to be
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top