Shift peg.....
Results 1 to 4 of 4

Thread: Shift peg.....

  1. #1
    Active Member
    Join Date
    Mar 2010
    Location
    Gulfport, MS
    Posts
    44

    Default Shift peg.....

    I know there are several posts on here about this subject, but if someone has a step by step with pictures I would really like it. I have a dremel, sawzall, etc but I don't have a grinder just as an FYI so can I still do this mod with the tools that I have

    I ordered both the Kuryakyn ISO cover as well as the HD short ISO peg just in case.

    Thank you in advance.

    Will.

  2. Remove Advertisements
    M109Riders.com
    Advertisements
     

  3. #2
    Very Active Member asillito's Avatar
    Join Date
    Dec 2007
    Location
    Toronto, Ontario, Canada
    Posts
    944

    Default

    The cover is crap. I cut off the stock peg and drilled/tapped a hole and put a Arlen Ness peg.
    Power, looks and style ... nuff said !!

  4. #3
    Very Active Member
    Join Date
    Apr 2018
    Location
    Maryland
    Posts
    332

    Default

    You’re overthinking it. Cut, drill, mount, have a beer....done.

  5. Remove Advertisements
    M109Riders.com
    Advertisements
     

  6. #4
    Active Member
    Join Date
    Mar 2010
    Location
    Gulfport, MS
    Posts
    44

    Default

    Quote Originally Posted by Bigpapa View Post
    You’re overthinking it. Cut, drill, mount, have a beer....done.
    I am thinking you may be right.... No turning back. The peg should be here this weekend so hopefully all goes well.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
-->