Type: Posts; User: thevili
Only 4400 km, Cobra TriPro exhaust, Cobra PowrPro fuel management, BrakeAway cruise control. Plus too many accessories to list, many still in tho box. I have for sale also brand new custom...
Not to be the smart ass, I personally think it is "Placebo"
effect ...For the exact reason the above member wrote...
The charging system looks after your bikes power
Thanx Matt, I just copied it from "Listan". :bigthumbsup:
2010 and up supplement:
there is a little extra old thread lock squeezed in between the rotor and the wheel.
Gentle hammer tapping all around the rotor should get it loose.
Curious if the OP will update us...
Difference between "PZ" (Pozidriv) and "PH" (Philips).... Note that "JIS" is third kind.
Check this plug under the tank, it has a tendency to push the wires out when reconnecting. Check the both sides of the plastic connectors..:
Pics. looks to me like it has been "chrome sprayed",
maybe this member can help you out:
Check his albums....
I have read here that some LED bulbs can be taken apart.
Similar experience had the member here "biker-chicky",
she had the front ones replaced with harder upper rear
ones, and the result for her was more vibrations...
In her hands, to be...
My choice would be the "stretched" one as well.
Looks prettier to me personally, no BCS logo naturally.:joke:
At one point there was a guy here, who took key-less ignition
to another level. He had the chip implanted under the skin
on his right hand, and receiver he had close to the kill switch..
Ok, on the "funny" note: :joke:
Quitting smoking anytime soon?
"LED" flasher will work with both types of bulbs,
but it will not warn you by hyper flashing when
one of your signal bulbs will fail. OEM flasher does it.
I am sure it will work no problem, retailers
just did not bother to update the info.
I think the wires "running/brake" in the "plug" are
accidentally switched from the manufacturer..
If you do not have a bike jack already, so you can lift the
bike up from one side and slide the dolly under the bike
from bikes other side, you need a strong Polish wife who can
Also make sure that minimal height is low enough to fit under the bike
not only when it is on the side stand, but if you lower the bike in the
future, like many of us did, too tall minimum...
Did you make sure that battery is being charged by the bikes charging
system? Voltmeter should show over 14 V when revving 2500 rpm.
"Hunter" a member here described the stiffness of hydr. clutch in his installation :
Many here said, that it is not easier and some say it is even harder.
What year is your 9? 2011 and up have easier clutch pressure sprigs
because they have six thinner plates. Description is...
What is your main reason you would like hydraulic clutch ?
One needs to find out the bore and stroke of the Suzuki master cylinder.
Then measure the stroke needed to disengage the clutch at the slave cylinder.
That will give you max bore of the...
Problem the OP has, is that Revo doesn't sell the
slave by itself anymore.. Where did you get yours?
Read this as well:
My apologies, I did not realised you posted this question on C109 thread......