Search Results - M109Riders.com

Search:

Type: Posts; User: Fishman349

Page 1 of 17 1 2 3 4

Search: Search took 0.07 seconds.

  1. Thread: New owner

    by Fishman349
    Replies
    56
    Views
    1,250

    I'd recommend looking at the GSXR 1000 if you...

    I'd recommend looking at the GSXR 1000 if you like the 1400. The GSXR has a lot of cool electronics like launch control, traction control, automatic or 6 speed transmission and I think I read they...
  2. Thread: Paint YKY

    by Fishman349
    Replies
    8
    Views
    280

    I'd sand it and then prime it with a tinted...

    I'd sand it and then prime it with a tinted primer, you could just use a light gray primer to save costs, and then paint it. :bigthumbsup: If you are going to do it by yourself try to make sure...
  3. Replies
    55
    Views
    2,134

    I'd say that one needs to be replaced. If you...

    I'd say that one needs to be replaced. If you look at the tab on the top of the mount in the pic with the "P" on it, it appears almost twice as long as the two on the left side in the pic. Maybe it's...
  4. Replies
    19
    Views
    697

    I have a Canadian dollar, .70 cents US, that says...

    I have a Canadian dollar, .70 cents US, that says those grips are made in China as well.
  5. Replies
    19
    Views
    697

    The ad claims that all that is included is the...

    The ad claims that all that is included is the grips, no glue for the left grip??
  6. Replies
    184
    Views
    6,455

    Just curious if all 4 plugs were wet. If only 2...

    Just curious if all 4 plugs were wet. If only 2 were wet you could have a hunk of something stuck in the injector keeping it open. In any case you should also pull your dip stick and have a smell to...
  7. Replies
    2
    Views
    449

    Yah, That one is nice as well, but I like chrome...

    Yah, That one is nice as well, but I like chrome better and I think I like the design of the one I posted better. Not so chunky:bigthumbsup:
  8. Replies
    2
    Views
    449

    Side Licence Plate Mount

    Just wondering if anyone had tried this mount and if so how is it? How did you light it? Any Vibration?

    https://www.revo-cycles.com/shop/m109r-side-mount-license-plate-bracket/
  9. Go and get yourself a left handed drill bit a...

    Go and get yourself a left handed drill bit a little smaller than the bolt and drill that sucker out. Yah, the little things can be a pain in the a$$ Good Luck :bigthumbsup:
  10. Replies
    6
    Views
    559

    "My main concern is how soft and thin the paint /...

    "My main concern is how soft and thin the paint / clear coat is on the 9." You can have it scuffed and apply another layer of clear to thicken it up. There are some very nice clears out there. One of...
  11. Thread: Decals

    by Fishman349
    Replies
    23
    Views
    2,242

    I have always used vegetable oil. Just rub a...

    I have always used vegetable oil. Just rub a little vegetable oil on the sticker at night and the next morning everything will come right off with no problem. :bigthumbsup:
  12. Thread: Curious

    by Fishman349
    Replies
    24
    Views
    1,274

    Sell it on here and take your wife out for a nice...

    Sell it on here and take your wife out for a nice romantic dinner and explain where the money came from while there. :bigthumbsup:
  13. Replies
    2
    Views
    552

    IMO, I would just leave it be unless you are...

    IMO, I would just leave it be unless you are having a specific problem. If it ain't broke don't fix it!
  14. Replies
    70
    Views
    3,004

    It's probably not this but it would not hurt to...

    It's probably not this but it would not hurt to check the clutch cable routing to make sure if the clutch cable was replaced it was routed properly and is not binding. Good Luck.
  15. I would start by testing the coils and the spark...

    I would start by testing the coils and the spark plug leads (wires) first. If everything checks out there, and while you have the tank off, you should inspect all the wire connectors to make sure...
  16. Thread: Baffles

    by Fishman349
    Replies
    9
    Views
    629

    If you can remove the pipe is there any way to...

    If you can remove the pipe is there any way to get a punch on the rear of the baffle and hammer it out that way or if it is not tapered perhaps you could hammer it in a little bit to break the baffle...
  17. Replies
    11
    Views
    492

    Wishing everyone a very blessed Christmas and a...

    Wishing everyone a very blessed Christmas and a Happy New Year. :bigthumbsup:
  18. I Installed my own and have had no problems with...

    I Installed my own and have had no problems with the PP Black except who I purchased it from. Not Denis Kirk. I have seen a few on here have some problems, but after talking with Cobra Direct they...
  19. Thread: Parts

    by Fishman349
    Replies
    10
    Views
    843

    I ordered my Cobra Power Pro Black from them and...

    I ordered my Cobra Power Pro Black from them and waited 3 months for delivery. Lucky it was during the winter and I was not riding. I got many excuses and was treated rudely by their customer...
  20. Replies
    15
    Views
    1,125

    There are many clear coats that are Satin or Matt...

    There are many clear coats that are Satin or Matt and you could polish the *hit out of them and they will not Shine like a gloss clear.
  21. Replies
    2
    Views
    534

    Good thing it was not a 9 because if it used the...

    Good thing it was not a 9 because if it used the same throttle as the HD the 9 would have cleared the landing ramp and hit the pavement. :D
  22. Replies
    21
    Views
    983

    The Elite 3 in a 250 is wider than the Metz 260. ...

    The Elite 3 in a 250 is wider than the Metz 260. If you check the specs on their websites you will see this is true.
  23. Replies
    18
    Views
    1,064

    Tire Manufacture Date

    In your picture, you have a partial SIN and the tire manufacture date is on there. Usually the week and year the tire was manufactured. not sure about the order. Theoretically, if it's under 10...
  24. Replies
    16
    Views
    919

    I would recommend re-building the rear caliper if...

    I would recommend re-building the rear caliper if you can get a kit after it was that hot. You have probably made the O rings on the piston a little crispy or hard. You could also inspect it while...
  25. Replies
    18
    Views
    1,082

    I think Cdn list is around $28,000

    I think Cdn list is around $28,000
  26. Replies
    18
    Views
    1,082

    Yamaha Eulder

    https://www.m109riders.com/forums/attachment.php?attachmentid=380900&stc=1 So, what do you think? I think it has the same motor as the Raider.
  27. Replies
    19
    Views
    886

    So, here is the thing with the tire you need to...

    So, here is the thing with the tire you need to know. When you slice a tire like this if it is just the rubber you may be ok. Yours leaked air which means you have probably cut the cords under the...
  28. Replies
    33
    Views
    1,379

    :bigthumbsup: Good one.:D ...

    :bigthumbsup: Good one.:D

    QUOTE=Bering_C_Sparky;3967516]When you blow it up......:joke: :D




    If the bike you are buying has sat around for years and was NOT ridden frequently........be...
  29. Replies
    16
    Views
    919

    Maybe a new set of boots or shoes resting on the...

    Maybe a new set of boots or shoes resting on the brake pedal. ???
  30. Replies
    8
    Views
    432

    IMO if you have a choice it's better without...

    IMO if you have a choice it's better without ethanol as it's corrosive???, at least I was told that?
Results 1 to 30 of 500
Page 1 of 17 1 2 3 4