Search Results - M109Riders.com

Search:

Type: Posts; User: Mrtallguy67

Page 1 of 17 1 2 3 4

Search: Search took 0.08 seconds.

  1. Replies
    10
    Views
    487

    :agree: Plus BCS can even send you a flashed...

    :agree: Plus BCS can even send you a flashed loaner ECU while he Flashes your OEM one.
  2. Replies
    21
    Views
    830

    Some say yes, some say no. I have a 160/300 set...

    Some say yes, some say no. I have a 160/300 set up now and was on a 280 in the past. I have LED's under the fender, so I made a set of fender extenders for my bike to be safe. I have also installed...
  3. Replies
    21
    Views
    830

    That or you can shim it with washers on the top...

    That or you can shim it with washers on the top side of the bolt rather than grinding, either way will work.
  4. Replies
    21
    Views
    830

    The 280 and 10'' rim will fit the stock swing arm...

    The 280 and 10'' rim will fit the stock swing arm without any modification. However, You will need to remove the rotor, caliper and even exhaust depend on what pipes you have to get it in. You have...
  5. Replies
    2
    Views
    253

    Here is mine with the new Arnott system combined...

    Here is mine with the new Arnott system combined with cyclehouse 1.5" drop bones. I dont rub with the system pressure dumped, but I think you would with 2".

    384058
  6. Replies
    8
    Views
    306

    I installed a set on a friends 109. I ground the...

    I installed a set on a friends 109. I ground the welds and pushed the weight deeper in the bars a few inches. I then used the hole from the ground weld to run the wire and it allowed it to exit the...
  7. Replies
    1
    Views
    214

    Is no one from KS or MO still active on the page?

    Is no one from KS or MO still active on the page?
  8. Replies
    7
    Views
    200

    I use Meguires Hot Rims (Blue bottle for...

    I use Meguires Hot Rims (Blue bottle for aluminum) (Red Bottle for Chrome) its PH neutral on my aftermarket anodized rims and my factory chrome car wheels. Its good stuff if you keep up on the...
  9. Replies
    1
    Views
    214

    KS/MO Group ride and get together!

    Hi everyone! I wanted to post a ride on here for those not on FB.

    A group of us are planning a ride/meet. A crew from the KC Metro are planning to meet a crew of from the STL area.

    We are...
  10. Replies
    31
    Views
    1,022

    :agree: 303 is great stuff!

    :agree: 303 is great stuff!
  11. I just installed a 17'' front set up on a friends...

    I just installed a 17'' front set up on a friends bike this weekend. He upgraded to a 10'' mimic rear runing a 280 tire and a mimic front 17'' currently running a 160/70/17. Its a wider wheel than...
  12. Replies
    22
    Views
    685

    WOW, Congrats Bud!! That's a nice unit and being...

    WOW, Congrats Bud!! That's a nice unit and being mobile is awesome! That's going to be a game changer for you!
  13. Replies
    4
    Views
    123

    Happy Birthday B!

    Happy Birthday B!
  14. Replies
    10
    Views
    751

    Unless you can find a used stock set keep the K&N...

    Unless you can find a used stock set keep the K&N and use them. They are at least reusable if you ever have another puke issue. The stock elements are $47 a side and not reusable.
    ...
  15. Replies
    9
    Views
    443

    Love my condor! I have used it on stock 130 and...

    Love my condor! I have used it on stock 130 and now my 160 set up and it works great. Rock solid unit, my bike is parked in it whenever its not being ridden.
  16. My Brother in law has a reverse trike similar to...

    My Brother in law has a reverse trike similar to this with a motorcycle power plant, but his is a single seater. I don't know why 99% of these look like garbage, probably because they never have any...
  17. Replies
    12
    Views
    555

    From the factory the cable is routed under the...

    From the factory the cable is routed under the front motor mount. When the mount wears out it causes the motor to sag. You can adjust the cable properly while parked, but the stress on the cable as...
  18. RR, I dont have the specs off hand, but I wanted...

    RR, I dont have the specs off hand, but I wanted to ask you about the arm and maybe offer some words of advice. I have the Swampworks arm and its the same design. The 3 bolts (1 pinch bolt and 2...
  19. Replies
    12
    Views
    555

    The routing location of the cable from the...

    The routing location of the cable from the factory can affected the cable life due to failing front motor mounts. If you have old worn out mounts it can cause the cable to fail prematurly. If you...
  20. Thread: New pipes

    by Mrtallguy67
    Replies
    2
    Views
    203

    Good to see another local! Welcome to the...

    Good to see another local! Welcome to the madness! What part of KC are you in, there is a growing group of us in South JOCO.
  21. Replies
    5
    Views
    253

    Mine is a Swampworks arm.

    Mine is a Swampworks arm.
  22. Replies
    5
    Views
    253

    I installed mine about a year ago. I would have...

    I installed mine about a year ago. I would have to say the ease of install is going to be equal no matter whos arm you chose. However the ease of tire changing after the arm is installed I would say...
  23. Replies
    9
    Views
    512

    Did you get the mounting plates as well as the...

    Did you get the mounting plates as well as the head covers from BCS? I could be wrong but if I recall they changed the retaining grommet hole locations when they went to the plastic covers.
  24. Replies
    9
    Views
    512

    I tried it on mine along with my derby cover and...

    I tried it on mine along with my derby cover and other bits as I was trying to decided what to black out and what to not. It held up well in all the locations I tried it on for a moth or so of...
  25. Replies
    6
    Views
    234

    Happy Birthday CJ!

    Happy Birthday CJ!
  26. Replies
    25
    Views
    1,352

    GLWS. Its good to know this wont work with the...

    GLWS. Its good to know this wont work with the corbin seat since I have been considering buying one and currently have a corbin.
  27. :agree: There is a lot of weight behind that...

    :agree: There is a lot of weight behind that front tire and the 9 has pretty decent brakes. If you grab front brake in the middle of the turn you will likely wash out low side. Slow in, fast out!...
  28. Message sent.

    Message sent.
  29. Interested in the stock control housings if they...

    Interested in the stock control housings if they work with a 2012 bike. I thought there was a slight change during one of the years. Do you know what year they came off of?
  30. Replies
    11
    Views
    697

    I see your in Kansas Gary. What part? I'm in...

    I see your in Kansas Gary. What part? I'm in south JOCO out in Gardner. Got a good group of local 9 building in the area. Hopefully we can all meet up some time.
Results 1 to 30 of 500
Page 1 of 17 1 2 3 4