"NEW PRODUCT" REVO High-Performance Silicone Radiator Hose Setup [Archive] - M109Riders.com

View Full Version : "NEW PRODUCT" REVO High-Performance Silicone Radiator Hose Setup



Rainey5230
12-11-2018, 09:35 PM
Been busy these days and our new product "REVO High-Performance Silicone Radiator Hose Setup" finally done!
381274
We design this silicone hose setup that can endure extreme pressures and temperatures in order to ensure that even modified motors maintain their peak horsepower by increasing the efficiency of the cooling system! Also, this silicone hose setup is directly replaced the stock rubber hose (total 10 hose, 8 for radiator 2 for oil cooler)
381276381280
And silicone is a stable material not like rubber hoses are easy to cranking, becoming stiff, dry rotted. So I think this product is not only for performance but also help M109R owner save money!

I know there's some discussion about our price lately... so I do my best to offer a favorable price for anyone who loves our product.

10 stock rubber hose as ours cost about 140 USD, not including shipping cost. (I know maybe there's free shipping on some website, so I assume none). And our pricing this time is 180 USD including international shipping. 8)

leave message, any suggestion are welcome!!

Bering_C_Sparky
12-12-2018, 12:52 AM
That is not a bad price at all for a complete set of silicone hoses for the M109.

The stock OEM hose set from Suzuki cost almost that price.

I just changed all my hoses and thermostat a few weeks ago, had I seen this set I would have purchased it instead for sure.

There are a lot of older M109R's out there still riding around on the original hoses......which is a disaster waiting to happen. (A few of mine were chaffed really bad and ready to break)

I think you will have no problem selling a lot of these.

BCS

TainoWarrior
12-24-2018, 04:34 PM
Count me in I take a set of blue hoses for my M109R


Sent from my iPhone using Tapatalk

Rainey5230
12-24-2018, 11:18 PM
Count me in I take a set of blue hoses for my M109R


Sent from my iPhone using Tapatalk


No problem, I'll save one for you

TainoWarrior
12-24-2018, 11:28 PM
Do I order from your website or eBay where can I order the hoses from ?


Sent from my iPhone using Tapatalk

FlyingCircus
12-24-2018, 11:37 PM
Do I order from your website or eBay where can I order the hoses from ?


Sent from my iPhone using Tapatalk


I've bought from him a couple times. Buy from his website

Rainey5230
12-25-2018, 03:06 AM
Do I order from your website or eBay where can I order the hoses from ?


Sent from my iPhone using Tapatalk

you can find it on website and eBay.

http://www.revo-cycles.com/shop/revo-high-performance-silicone-radiator-hose-setup/

https://www.ebay.com/itm/142755874540

cbxer55
03-28-2019, 11:03 PM
That is not a bad price at all for a complete set of silicone hoses for the M109.

The stock OEM hose set from Suzuki cost almost that price.

I just changed all my hoses and thermostat a few weeks ago, had I seen this set I would have purchased it instead for sure.

There are a lot of older M109R's out there still riding around on the original hoses......which is a disaster waiting to happen. (A few of mine were chaffed really bad and ready to break)

I think you will have no problem selling a lot of these.

BCS

So my 2006 with stock hoses is a disaster waiting to happen? LOL! The year I bought my Nine, I was still riding a 1972 Suzuki GT-750J Water Buffalo, liquid cooled two stroke triple. It still had stock radiator hoses on it at 34 years old.

And what's with the different colors anyway? Not a one of them can be seen by anyone except the person taking the bike apart. LOLOLOLOL!!!!!

Not begrudging anyone for making these. You want em, go get em. I'll be keeping my invisible disaster waitint to happen, til the disaster actually happens.

NoSetFine
03-29-2019, 10:57 AM
Cbxer...dude you routinely crack me up. Lol.

In defense of BCS however, teccchnicalllyy... ALL bikes of ANY age are a disaster waiting to happen... just like we are all "waiting" to die. You just don't know how LONG you gotta wait! Haha

Chilly Rock
03-29-2019, 02:54 PM
There's nothing wrong with preventive maintenance. I'd prefer to do preventive maintenance and change worn out parts in my garage than being a 100 miles from home in the middle of nowhere stranded. I still have original hoses on my 07 but this got me thinking that I need to change my hoses this year. I'll definitely order this kit soon.

JUDAH-9
03-29-2019, 04:24 PM
I definitely believe that the Silicone Radiator Hose Set is superior to the stock hoses, and would be a huge, long-lasting upgrade for the 9. In fact, I doubt the silicone hoses would ever need to be replaced, as long as the bike is stored and cared for properly.

In contrast though, why replace hoses now that have quite a bit more service life left on them? Why not get as much mileage out of the stock hoses as possible? As a matter of fact, I havenít heard or read much at all about members here having had their stock radiator hoses fail. Most of our members store their 9s away in places that keep them very well protected from damaging/debilitating weather and climate conditions, while also servicing their 9s themselves, or having someone else service them routinely. This allows/helps our members to be abreast of things like frayed, cracked, or dry rotted hoses if/when they occur. As soon as any of mine begin showing signs of wear or aging, Iím having them replaced with the Silicone Radiator set immediately.

NoSetFine
03-29-2019, 09:02 PM
I think we may be collectively missing an important point about replacing perfectly functioning black rubber hoses with fancy custom new silicone ones.

Do our mufflers die before we replace them?
Do our rims break before we upgrade them?
Seat?
Light?
Air Intake...?
Lol.

I think maybe the marketing was just slightly off. Sure, some things are considered "upgrades" (brighter light, new ECU flash, more air intake...) but generally, a lot of stuff we replace isn't really because the old one is broken, it's because, for whatever reason, we mostly just want it to be different from whatever it currently is...
:bigthumbsup:

Bering_C_Sparky
03-29-2019, 10:29 PM
When I bought my 2008 I stripped the bike to redo a lot of wiring.

I found 2 coolant hoses with visible signs fo wear from vibration.

That is when I ordered all new hoses (maybe my bike is the only M109R that has any vibration) :joke:

Best $150 I spent on the bike as far as I am concerned.

Having a coolant hose brake during a 3 digit run 100 miles from home would not be any fun at all, and could very likely end up costing much more than $150.

I am the same way with my truck..... Hoses, Fluids, Brakes, Shocks, etc all get replaced long before they go bad.

This is just good engineering practice.......Working on a ship you learn early that maintenance is king and you keep your equipment in top notch shape......not wait for something to fail then replace it.

Getting stuck in the middle of the ocean due to a failure is no fun....been there, done that, got the t-shirt.

Pretty sure Cbxer said he works on airplanes :o........hopefully the run it till it breaks mentality is not SOP at work.....if it is I need to know what airline. :P

BCS

NoSetFine
03-30-2019, 09:18 AM
...

Pretty sure Cbxer said he works on airplanes https://www.m109riders.com/forums/images/smilies/shocked.gif........hopefully the run it till it breaks mentality is not SOP at work.....if it is I need to know what airline. https://www.m109riders.com/forums/images/smilies/icon_razz.gif

BCS

Lol.

JUDAH-9
03-30-2019, 12:44 PM
In my opinion, if the stock hoses are not physically impaired, I see no reason to change them out. However, if/when they do appear to be worn to the point of being questionable, I would replace them with the new Silicone Radiator Hose Set. Additionally, whoís to say the Silicone Radiator Hose Set canít become damaged and worn out over time? I love mods and upgrades, but Iím not too sure I would be in a hurry to do this one. Maybe on my next 9 project Iíll start off with this mod/upgrade since the bike is going to be totally torn apart anyway.

cbxer55
03-30-2019, 12:50 PM
But BCS, I've been driving since 1976. I've never, not once, had a radiator hose on a car, truck or motorcycle go bad on me. Yes, I've replaced some that looked like they needed to be replaced. I won't replace them unnecessarily, with some funky colored hoses that no one can see, just for the sake of doing so. YMMV.

I had my bike apart last year, and replaced all the clamps on all the coolant hoses, as I had signs of leakage, as usual on these bikes. I saw not one hose that needed to be replaced. But, I keep my bike garaged when it's not being ridden. Park it in the shade whenever possible when out-and-about. Don't worry, I don't run them til they break. I run them until the appearance indicates they need to be replaced. Hasn't happened yet.

I work on military aircraft, not airlines. And when I work on them, I do so as if it were my airplane and I was the one flying it. I do in fact have a private pilot license, and have flown quite a few hours. The aircraft I work on are based on old Boeing 707's. Parts just aren't available for them these days. There's quite a few flying around with parts I made for them. I take pride in that. Take an old broken, cracked, corroded part off, reverse engineer it and make a new one, match drill it and put it on. It's way cool. I so enjoy doing what I do. I hope everyone enjoys their work as I do. Here lately, we had an aircraft with APU damage. The exhaust gasket leaked, and burnt a bunch of structure. Had to cut many parts off the aircraft and make replacement parts. Lot of work, still in process, but nearly done. Hopefully this weekend will see it complete. Doing the wrap-up work today and tomorrow.

I'm sure Rainy takes great pride in what he does. They are nice hoses, and if I were in need of some, I'd get them today. Was working on my nine's tank the other day, taking the BOULEVARD badges off and putting INTRUDER badges on. Tank wiggles pretty bad. Might want to get me some of those tank holders that he sells soon.

I see some have his headlight. Yet, there is no thread in his forum about it. Odds bodkins.

cbxer55
03-30-2019, 01:21 PM
I think we may be collectively missing an important point about replacing perfectly functioning black rubber hoses with fancy custom new silicone ones.

Do our mufflers die before we replace them?
Do our rims break before we upgrade them?
Seat?
Light?
Air Intake...?
Lol.

I think maybe the marketing was just slightly off. Sure, some things are considered "upgrades" (brighter light, new ECU flash, more air intake...) but generally, a lot of stuff we replace isn't really because the old one is broken, it's because, for whatever reason, we mostly just want it to be different from whatever it currently is...
:bigthumbsup:

That's very true. And if these hoses were visible once installed, I'd do them tomorrow. LOL! But you cannot see one of them. Maybe those guys who've done the under tank air intakes could see one of them. But that's about it. They're hidden from view to everyone but the person taking the bike apart.