I have toe codes reading C32 and C33, I know that they are for the front and rear cylinders. Anyone have any ideas on what to try first to start the bike?
What kind of modifications do you have done on your bike? Those two codes mean that the ECM is not receiving a signal from the fuel injectors. Most likely, their connection to the wire harness has come loose or may have been severed.
I have cobra swept pipes and a power commander. I also had a number of LED lights that I removed and I cut the wires up close to the battery instead of removing the tank and following the light wires all the way back to where I mounted the lights that I mounted. It sounds like I could have cut a wire that I was not supposed to or disconnected something I was not supposed to.
I will try that after I get off of work. The blue and yellow wires are coming from the power commander, do you know if the blue goes to the positive or the negative post on the battery?
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
M109 Rider Forums
1.6M posts
32.7K members
Since 2006
A forum community dedicated to Suzuki M109 Motorcycle owners and enthusiasts. Come join the discussion about performance, modifications, classifieds, troubleshooting, maintenance, and more!