Passenger pegs relocation kit

[mycaljh]

Guys I thought I saw somewhere a passenger peg relocation kit,mod,or something
is their such a thing or am I just hopefull.Her knees get kind of tired after a long ride....NO PUN INTENDED...LOL...any help will be appreciated .

[lostrider]

Not to much out there other than making your own. But rivco offers a relocation kit but you need to buy their passenger floorboards which you might want to do anyway to make her really happy. Here's a couple of links

http://www.directlineparts.com/produ...d=9871&str=290

http://motorcycle-accessories.cruise...tm_source=bing

You can also try contacting this vendor they might be able to point you in the right direction. A lot of the suzuki's share the same parts so maybe one of these would work.
http://www.scootworks.com/shop.cgi/p...D=PUT_SID_HERE

[gottattooz]

I swapped the passenger peg brackets from left to right. It pushes the pegs forward about 4 inches. Here's how I did it. I mounted the opposing pegs with the bottom bolts only, leveled the brackets, and drilled a new top mount hole. I also got some cheap universal floorboards so she could move her feet around to adjust her comfort level.

-Josh

[Luv383]

Josh, does this allow you to use the side covers,or do you remove them when you take your wife with you, and then put them back on later? I had thought of doing what you mentioned, but couldn't figure out the side covers without some cutting.

[gottattooz]

Josh, does this allow you to use the side covers,or do you remove them when you take your wife with you, and then put them back on later? I had thought of doing what you mentioned, but couldn't figure out the side covers without some cutting.

Yes, I remove the side covers when the wife rides. When I"m solo, the passenger pegs and brackets are removed, and the side covers go on.

-Josh

[CDM76]

mycaljh,

I did a similar mod to Josh, with no drilling. My gf is 5'10" and has similar problems with the pegs being too close/high for her. I popped the side covers off and switched the passenger pegs to the other side. The link I got most info from was : http://www.m109riders.com/forums/sho...passenger+pegs

I did not drill anything, just switched sides the pegs are on. This effectively moved the pegs forward about 4 inches and down about 1/2 inch. My gf LOVES this set up and is now able to ride for a couple hours without complaints (although she still likes taking a break every hour or two "just because" ) I keep the bike with the 2 vertical side covers off, but all other covers remain on.

Hope this helped.

Craig

[CDM76]

For anyone still looking for a relocation kit check this out ... http://www.canadasmotorcycle.ca/cobr...n-bracket.html
I'm going to order one and install this winter. Hopefully I can then put all the covers back on and keep a cleaner look.

[Wjduke]

My passenger relocation is to the couch....that's where they can stay while I ride!

[Chops]

For anyone still looking for a relocation kit check this out ... http://www.canadasmotorcycle.ca/cobr...n-bracket.html
I'm going to order one and install this winter. Hopefully I can then put all the covers back on and keep a cleaner look.

Is there something I'm not seeing or do these only suit HD