Sources for Paint, Polishing, Chroming and LEDs in Ontario

[CanadianM109R]

Here are the sources that we found at the Supershow. They all do great work from what I saw. If you have a source for something that I don't list, then post it and I will add it to the list. Hopefully this will be a great resource for Ontario riders if you are thinking of having something done to your bike.

Seats:

!!!Ultimate Seats: www.ultimateseats.ca. Wow! Seats like corbins, but more comfortable and manufactured in Toronto for half the price! 1-416-742-6681 or 1-800-818-6868. This is where I will be going to get my aftermarket seat for sure!!!!

Paint:

Wizzard Custom paint - www.wizzardcustompaint.ca Really nice work. He can handle anything you can throw at him. Saw his work. very nice.

Stoney Creek Choppers- www.stoneycreekchoppers.ca Really nice work too. Amazing graphics. Very nice.

Polishing and Chroming:

Polishing depot- www.polishingdepot.com. 30 years polishing experience. The guy doing the polishing really knows his stuff. They also do chroming, but I would really want to visit them and check out more of their work, and ask about how they do their chroming: how many layers, prep, etc. to be more comfortable with that.

The plating House of Canada- www.theplatinghouseofcanada.ca Concord. Top Notch Chroming.

Towing:

Motolimo- 1-866-211-1946- they have a special tow system especially made just for bikes.

Tow-a-bike- 1-855-869-2453- same.

Trailer Strapping:

Reinhart trailer sales: Has fork tiedowns for trailering. Caledon, ont. 905-846-1071

LED Supply and Install:

JD customLighting- www.jdcustomlighting.com sales of LED lights and installation based in Sutton. During the winter up to march, he will come to you to do your bike. After that, you need to visit his shop. I saw his work, and it is top notch.

Ultimate LED- don parsons- 519-939-8499. he's west of orangeville in Arthur ontario. Haven't seen his work.


If you know of a shop that isn't on here, let me know and I will add it.

[Stavros]

Thanks for posting that up Chris....I was hoping to make the show for this very reason...these seat people,do they rework your stockers or make a complete new seat?didnt know about JD custom lighting in sutton,can't believe that since I spend so much time around there....

The plating house of Canada,in concord does some top notch chroming...do a lot of old classic cars and a ton of Harley chrome...high quality for sure

Thanks for posting up..

[CanadianM109R]

Thanks for posting that up Chris....I was hoping to make the show for this very reason...these seat people,do they rework your stockers or make a complete new seat?didnt know about JD custom lighting in sutton,can't believe that since I spend so much time around there....

The plating house of Canada,in concord does some top notch chroming...do a lot of old classic cars and a ton of Harley chrome...high quality for sure

Thanks for posting up..

No, they supply a new seat.
They showed us a 109 seat that had a fiberglass/foam hard pan on the bottom which is way better than the plastic pan we have now on the stock seat. Quality is excellent, and they do custom stitching, custom colours, materials and panels in the seats. They had tons of seats on display for all kinds of bikes. The guy was saying that they do most of their work by referral.

If you stop by there with your bike, they will even let you take a seat for a test drive on your bike!!!

I still can't believe these guys are manufacturing these high quality seats in toronto right under our noses!

[skwm109]

Another person I've met through the motorcycle show is Lissa Hill of Lissa Hill Leathers
she is located in Hamilton.
I've bought a few things from her and everything has been incredible quality. All her stuff is custom but prices are awesome. Her half chaps for men are great for hot days when you don't want to to ride with full leathers. Anyway, if you're looking for any new gear, check her out.

No, they supply a new seat.
They showed us a 109 seat that had a fiberglass/foam hard pan on the bottom which is way better than the plastic pan we have now on the stock seat. Quality is excellent, and they do custom stitching, custom colours, materials and panels in the seats. They had tons of seats on display for all kinds of bikes. The guy was saying that they do most of their work by referral.

If you stop by there with your bike, they will even let you take a seat for a test drive on your bike!!!

I still can't believe these guys are manufacturing these high quality seats in toronto right under our noses!

[M109RTOOGO]

Goes to show us that we can have/find quality venders near by

[Rudebwoy]

http://www.jdcustomlighting.com/ is coming on Sat to do my bike I will post pic when done.

[Rudebwoy]

http://www.jdcustomlighting.com/ well john came by today and put the LEDs on my bike and it looks great .Will post photos later he does great work!

[Stavros]

Looking forwards to seeing what you had done...seems like he took care of you rather quickly...

[M109RTOOGO]

Ok Gary, It's later?

[CanadianM109R]

Stay tuned, I'm helping Gary upload a little something for you guys to see right now.........30 minutes or less to finish, I think you will like it......

UPDATE: AAAARRRGGGHHH!!!! Damn Photobucket....its on the way....

Got it done with Vimeo. See below.

[ChiWaWa]

Please post the cost for the install, how many lights he put on and remote options?

[Rudebwoy]

it was $600 for the lights and install over 300 lights remote you have a choice of $45 or $95

[Stavros]

maybe with all the led's flashing the wives came out to the garage and turned it into a all night disco party...

guess there tired and still in bed...

[fatblack]

No, they supply a new seat.
They showed us a 109 seat that had a fiberglass/foam hard pan on the bottom which is way better than the plastic pan we have now on the stock seat. Quality is excellent, and they do custom stitching, custom colours, materials and panels in the seats. They had tons of seats on display for all kinds of bikes. The guy was saying that they do most of their work by referral.

If you stop by there with your bike, they will even let you take a seat for a test drive on your bike!!!

I still can't believe these guys are manufacturing these high quality seats in toronto right under our noses!

Those Ultimate seats are made in TO ?

I really want a custom seat. I have the gel seat and i like it but the fitup on the rear cowl in terrible!

[fatblack]

it was $600 for the lights and install over 300 lights remote you have a choice of $45 or $95

That looks awesome Gary...Can you change colours and flash sequence and all that fancy stuff?

[Stavros]

Those Ultimate seats are made in TO ?

I really want a custom seat. I have the gel seat and i like it but the fitup on the rear cowl in terrible!

they make a very comfortable seat...only problem is if you don't want the backrest your still stuck with the flap on the top of the seat,they wont make it without it....not sure why

[CanadianM109R]

OK, here it is, you need sound:




I would say JD did a good job, wouldn't you........looks like it was worth every penny.

The picture posted above doesn't do it justice, but the video does

PS, if you can't see the vimeo link, you need to download the latest version of free adobe flash player for it to work.

Here's the old school link: http://vimeo.com/35451324

[Stavros]

Nice worth the wait....great tune Chris !!!

[CanadianM109R]

Those Ultimate seats are made in TO ?

I really want a custom seat. I have the gel seat and i like it but the fitup on the rear cowl in terrible!

Yes, I still can't believe they are made right here in TO. It looks like they are based in Florida, but that is to appeal directly to the US buyers. Note the phone numbers of the factory (416 area code!)

Give them a call. They do custom materials, stitching, and panels on the seat. Pretty much whatever you want.

[Rudebwoy]

Thanks Chris, that looks great and to think I was going to fire you as my videographer, LOL! Great song choice, Vanessa loves it!

[CanadianM109R]

Thanks Chris, that looks great and to think I was going to fire you as my videographer, LOL! Great song choice, Vanessa loves it!

.....and the cheque is in the mail, lol! Glad you like it!

[M109RTOOGO]

Great job Gary/Chris looks and sounds great

[Rudebwoy]

That looks awesome Gary...Can you change colours and flash sequence and all that fancy stuff?

Paul its only red but you can do the flash sequence .

[fatblack]

Just watched the video Gary!
Looks great!

[fatblack]

Yes, I still can't believe they are made right here in TO. It looks like they are based in Florida, but that is to appeal directly to the US buyers. Note the phone numbers of the factory (416 area code!)

Give them a call. They do custom materials, stitching, and panels on the seat. Pretty much whatever you want.

I will be giving them a call shortly and by shortly I mean in the spring... I really want a nice looking seat

[tbar]

[Rudebwoy]

Thanks guys I am happy with the look

[CanadianM109R]

Bump for the new members