Can you guess what this is and why it is significant to me today?
Can you guess...
Can you guess what this is and why it is significant to me today?
2011 Black, Cobra PowerPro, Debeavered, DeReflectored, LED Licence plate light, 280 Metzeler Rear/160 Metzeler Front, Legacy Wheels, Sportiva HID Headlight, 2.25 Lowering Bones, Chrome Grill, Chrome Motor Mirror Plates
A homemade golf tee
Part of a mounting bracket....
Significant... Was that ever part of your body
Mr Sandman is close....
2011 Black, Cobra PowerPro, Debeavered, DeReflectored, LED Licence plate light, 280 Metzeler Rear/160 Metzeler Front, Legacy Wheels, Sportiva HID Headlight, 2.25 Lowering Bones, Chrome Grill, Chrome Motor Mirror Plates
Putting on your Suzuki Engine guards. Have fun, they can be a bit of a pain. Check my profile for the thread I stared on it. There are some pics and good help there.
MODS LIST: Scorpion Tips, 250 Rear, 160 Front, Lanzar MC90 Speaker System, HID 8K Kit, Spike Flame Stem Mirrors, Windshield, 230 White LEDs, Chrome Billet Grill Mod, Chrome Tank Trim
1 BOLT SHORT OF A FRANKENSTEIN COSTUME
what'd I win?
-Dave
LOL I like this one best.....Originally Posted by EYELESS
1 BOLT SHORT OF A FRANKENSTEIN COSTUME
what'd I win?
Go Big or Go Home
'07 RED - Cycle House Big Air intakes, Debadged/Debeavered, PC III, Kuy grips and pegs, 50 watt driving lights, 260 Metz., sport windshield, chrome wheels, Gen III Knight Rider, Drivers Backrest, Dragon Tail Light, Derby and Side Lic Frame, +2 risers, 5" Cannon.
Ding ding ding ding
Correct. The reason why it is significant is because after I got everything off and the right side bar on I realized the spacer does not fit the bolt that is supposed to go through it for the leftside . I'll be calling Suzuki to give them an ear full.
If you order OEM highway bars make sure you check this first.
2011 Black, Cobra PowerPro, Debeavered, DeReflectored, LED Licence plate light, 280 Metzeler Rear/160 Metzeler Front, Legacy Wheels, Sportiva HID Headlight, 2.25 Lowering Bones, Chrome Grill, Chrome Motor Mirror Plates
Is it in your tire now.
keitho
Known issue. Been like that for years. Suzuki has been told about it but obviously they didn't fix it.
Did you grind/file down the upper "clutch-side" (right side when looking at the front of the bike)? if not, you should.
MODS LIST: Scorpion Tips, 250 Rear, 160 Front, Lanzar MC90 Speaker System, HID 8K Kit, Spike Flame Stem Mirrors, Windshield, 230 White LEDs, Chrome Billet Grill Mod, Chrome Tank Trim
Did you grind/file down the upper "clutch-side" (right side when looking at the front of the bike)? if not, you should.
MODS LIST: Scorpion Tips, 250 Rear, 160 Front, Lanzar MC90 Speaker System, HID 8K Kit, Spike Flame Stem Mirrors, Windshield, 230 White LEDs, Chrome Billet Grill Mod, Chrome Tank Trim
I just ran into the same problem. I just put mine in a vise and drilled it out one size bigger.
07 M109r LE Copperhead paint * 260/160 * Cobra Swept Exhaust* Corbin seat * Tach relocated * Debeavered * Braided lines & cables * Rivco Risers * Big Air * Much, Much More!
I had the same problem. I just replaced the spacer with a stack of washers, you will not see them anyway.
It's funny (sad), because you would think that when you buy a factory accesory, everything would fit. When I began my install, and dicoovered this problem. The only thiing I could say to myself is "REALLY". Then I went digging in my washer bucket for 5 or 6 washers that I could use to make a spacer. Worked out just fine.
147 or 047
Bully,
Was that Suzuki part number 990a075147 or 990a075047? I recently installed the "147" kit and the spacer was OK.
09 "Blackey" - Swept, Engine Case Guarded, Derby'd, Iso Gripped, Badged, Boned, De-Shuddered, Beavered, Risen, Cabled
Mine was the "047" and had to drill.
Posting Permissions
Reply With Quote
