What Have You Got Planned For WINTER MODS?

[SilverFox]

Here is my list..... a L&M Busa cover and Stealth fender to include a complete paint job and these : http://www.m109riders.com/forums/sho...d.php?t=160438

I can't wait.. gonna be a wonderful winter.......Ride Safe!

[Beedub109R]

winter . whats that? none in my state. 365 days of riding.

But I'm gonna do mounts, Powdercoat every inch of chrome left and go green (House of color Lime Gold) on the tins.

[honestabe]

Adjustment pin mod,motor mounts and custom dynamics rear leds.

[Chapmandoo]

Wheels and tires (going 280)
Exhaust (want a 5 or 6 inch cannon because I think they look freakin bad ass)
Fuel managment system
Tach relocate
debeaver
grips
air cleaners
seats (and MAYBE a backrest for the ole lady)
air ride or lowering bones (depends on how much cash I have left after the first 3!)

Should have around 8k to spend over the winter ... I want to black out all the chrome but I think I may have a change of heart and will just keep it chrome. If I decide NOT to black this beast out I will need new chrome risers too!

Anything I am missing?

[m109greenskull]

I 'm gonna black out my fork tubes, fork ends, tach housing, tank /speedo cover, intake covers, hub, and who knows what else. Got a stebel horn and foot pegs, so those will be put on, and I'll see if there is anything else I can think of.

[Captnpirate]

winter . whats that? none in my state. 365 days of riding.

Ditto.....riding year round is a pleasure some don't get.......so wepost pictures for them to "remember the feeling".

[TORQ]

1.} Chrome Front, Fork Tubes (SUMU-X's) And I better order soon, they take 4 months But that's going to happen!
2.} Front wave Rotors


There will be other small items, but the others are for sure.

[KarateMoto]

what is this "winter" you speak of?

I love San Fran . . I love Pete's Coffee!

[ROCKMUZK]

WINTER MODS "Reality Check-List" . . Which is what I'm actually going to get done!

Includes: Polishing front and rear wheel, Triple Clamps and Forks and braided lines for the front brakes.

It might include A 7" Headwinds Headlight mod, Handlebars and tach relocation . . but that might be pushing it.

How About YOU?!

WELL as for me i am going for the 280 wheel (chrome)....upgrade to a bigger front wheel (size not yet determined)
change the plate holder to mount on the wheel & reduce turn signals on the rear to LED,s.....thats it for me!! bcuz (clearing my throat) "I PICK UP MY BIKE THIS SATURDAY!!!!".....AND MOST IMPORTANT MOD!!!.....SLIDERS!! THATS A MUST!!

[chef109]

No mods just maintenance but I did just pick up a 1985 YZ80 for $100 that I plan to get running and tinker on all winter. This little sucker is supposed to be able to break 80mph, not with my fat ass on it though.

[southernmostm109r]

Usually in the dead of winter when the mercury finally drops below Eighty I usually trim the coconuts from my trees then I usually go for a ride.

[Wjduke]

Usually in the dead of winter when the mercury finally drops below Eighty I usually trim the coconuts from my trees then I usually go for a ride.

Good one...I'm jealous

[WIDE LOAD]

6" CANNON Ya I'm yellen been waiten 2 years !

[Joesampson]

Well, as of now the plans are:

160 front/280 rear metz
All chrome powdercoated black
Orange stripe painted flat black
Freedom performance shorties
Fuel management(still need to find out the best)
Black ISO driver/passenger pegs
Hard saddlebags
Black 2" h-bar risers

Thats kinda what i'm shooting for.

Last week i found out my first bundle of joy is on the way....so will have to see what gets done. Maybe a quick connect baby seat mod.

[RUBZERK]

I just dropped off my Rainey chin and L&M chin at the painters today.
I have all new +3 SS cables (brake, clutch & throttle)
new brake pads
MH floating rotors
Air ride remote
Front fender extensions
Chrome +2 Yani risers.

Hoping to get chrome rims, levers, kickstand.

[lostrider]

Well, my plan started out as no new mods this year. Needless to say that plan went out the window once again. Just ordered a set of Cobra Power Flo intakes. They are on their way according to UPS. Now, cobra has decided they will not be making these for the 109. I watched a few videos on install of these intakes on a Harley. Based on what I saw on the videos I feel I can easily mod these to fit onto my current set up. So, with that in mind, I ordered 2 Power Flow intakes for a Harley. I have my throttle tamer to install along with some new contrast cut grips. Lastly, I will continue my search for a killer deal on Arnott air ride. I would like to go to air ride but as I am already north of 18k in mods on this bike already. I need to find air ride that won't cost me another 7-8 hundred bucks. Good luck to all in their off season mods and to our brothers and sisters who have no off season, I say, ride on.

[Stavros]

what is this "winter" you speak of?

Was in San Fran yesterday,sure felt like winter..

[Memphbull52]

For me I'm going with a custom exhaust, matching disc and rim combo, white stainless steal lines delete right front disc. Maybe a 21" inch rim in the front. If funds allow me some custom white gator and suede or white ostrich and suede seats. May as well have a good wish list.

[DarkHorse9825]

New pipes, spiked air intake and I have the Rainey chin scoop that I am going to mold into the front radiator shroud so it is one piece.

Might at some chrome bits here and there, but not sure.

[LOFLYR]

Just added another project to my list last night. Picked up a brand new never used take off stock exhaust for $25!

I have always liked the shorty look where they end at the rear axle. My stockers are starting to blue a little at the top so I am going to cut up my stockers and keep this new set in case I don't end up liking the shorty's.

I am going to keep one baffle in to cut down some of the noise. Hoping I can get the short look without the ear bleeding loud noise.

[MainEvent]

Ohhh man... I don't even want to think about it right now, but I'm planning the following:

New Pipes (Currently Pending)
Yana Shiki 1" Black Risers
Yana Shiki Tach Relocator
Yana Shiki Short Kick Stand
Paint All Non-White Tins on Bike, Stock White
Paint Chin Spoiler Stock White and Install w/Irate Mesh
Black Vinyl Wrapped Forks
Black Vinyl SS Stripe down the middle of Bike
LED Front Turn Signals
Swing Arm 'M109r' Chrome Cover
All Steel Braided Lines
Front Wave Rotors
And finally possibly some LED's

[BigBully]

Scythe Mirrors - Just placed a bid on ebay
Chrome chin spoiler
Mesh grill. The only reason I'm holding off on it is because the grill on the chin spoiler doesn't have a matching main grill.
May pull the trigger on getting the 150 front tire
Possibly get the short highway bars

10/3 Update

No mirrors yet, but still looking
Will pass on the Chrome chin spoiler
Mesh grill
No front tire yet. Thinking about the 150 but might get the 160.
Highway bars came in today
Just ordered 2.25 lowering bones
HID light kit
Just ordered Cycle House key/side cover plates (Thanks Truth for this heads up)
4K mile service

The Mod Bug has bitten and it needs to be fed.

2/1 Update

Got mirrors from Amazon for a lot cheaper than the Cythe mirrors
One more payment on Legacy wheels from Costal Moto. 10in/280 rear 160 front
Installed the highway bars, lowering bones, HID headlight kit and the motor side cover plates.
Ordered the Cobra Power Pro auto tuner yesterday.
Bought a set of pipes from a fellow member but haven't installed them yet.
Ordered new Icon camo vest
Hinting to wife to get me the Bell Rogue helmet for my birthday in April

Who has done what they've planned for the mod season?

[NJDEVIL]

2/1 Update

Got mirrors from Amazon for a lot cheaper than the Cythe mirrors
One more payment on Legacy wheels from Costal Moto. 10in/280 rear 160 front
Installed the highway bars, lowering bones, HID headlight kit and the motor side cover plates.
Ordered the Cobra Power Pro auto tuner yesterday.
Ordered new Icon camo vest
Hinting to wife to get me the Bell Rogue helmet for my birthday in April

Who has done what they've planned for the mod season?

I didn't do anything like the list I first posted, I went WELL beyond that short list Just haven't posted any pic's because I don't want half azz pic's-want great pic's when everything is done

[weasel848]

Scythe Mirrors - Just placed a bid on ebay
Chrome chin spoiler
Mesh grill. The only reason I'm holding off on it is because the grill on the chin spoiler doesn't have a matching main grill.
May pull the trigger on getting the 150 front tire
Possibly get the short highway bars

10/3 Update

No mirrors yet, but still looking
Will pass on the Chrome chin spoiler
Mesh grill
No front tire yet. Thinking about the 150 but might get the 160.
Highway bars came in today
Just ordered 2.25 lowering bones
HID light kit
Just ordered Cycle House key/side cover plates (Thanks Truth for this heads up)
4K mile service

The Mod Bug has bitten and it needs to be fed.

i went 150 on the stock wheel, and it's bigger for sure, but i wish i had gone 160.

[Candypaintdrip]

Complete paint job, I made my own color at my shop ( black with silver pearl and silver metalic flake in basecoat ) Parts r ready for paint
Low and mean chin scoop
2 inch lowering bones-installed
Yana shiki exotic levers
Yana shiki exotic short kickstand-installed
Black Scythe mirrors
Rivco 2 inch risers-installed
Custom airbrushed Grim Reaper on derby cover-installed
Powder coating, wheels and handle bar control housings ( Gloss black ) Still waiting on them
Titanium peg feelers
Kuryakyn silver mini led bullet turn signals, front and rear-installed
Custom Dynamics chrome license plate frame with led-installed
Painted shaft cover ( black )
Ashari Wave rotors-Look amazing
Ebc sinistered HH brake pads

Hopefully all will be completed March 1st, thats my goal atleast haha. Will post pics when she is all finished, Its been an expensive winter!

[godservant78]

Me, not much, maybe some more LED's. Maybe a down under bracket. The wife's bike, gonna take the wheels and tires off and and seal her spoked rims so we can run tubeless. Maybe some more LED's on hers as well.

Ya know B, I think your idea just might work. I was thinking of some winshield sealant from the local automotive store over the spoke
holes, and then spray that Flexseal over the inside as you were considering and I thing that really would work.

[godservant78]

I have a new mesh grille, Chin spoiler, and the wheels and hub are boxed and sent to Simmons for CHROME!
Might clean up the rock chips and spice up the overall paint job. I found a color called Tuxedo Black metallic
on the Lincoln's. Looks pretty cool in the sunlight.
Plus a new 160 ready to install whel the wheels are back

[festersvan]

Air ride and 10" wheel next mods for me,read about a couple of problems with the arnott air ride on here so not 100% convinced yet

[lancaster]

Air ride and 10" wheel next mods for me,read about a couple of problems with the arnott air ride on here so not 100% convinced yet

Very jealous Fest, Wanted the air ride myself but couldn't run to the cost after all the things I'd read about it.

[arms92011le]

Air ride and 10" wheel next mods for me,read about a couple of problems with the arnott air ride on here so not 100% convinced yet

suggestion,,,do the 2 inch bones for now until u decide on airride,then ull be lowered and if u get airride the bones have always sold well on here