What psi for Metz 160?
If tried the search function and wasnt able to find this specific info. If I remember right the stock tire was 38 psi. The side wall on the 160 reads like its load bearing capability is rated at 50 psi cold. I've got mine at 40 right now and thought it felt a little mushy, but it may be all in my head. What are you guys filling yours to? Thanks.
Alex
I run mine at 42 psi...
BONE STOCK
Holy crap.
I do 44 rear metz260 and 42 for the 160 on the front as stated above. Some do a little more some a little less but this seems to be the generally accepted and most widely used pressure.
The trouble with our liberal friends is not that they are ignorant. It's just that they know so much that isn't so. -- Ronald Reagan
With Individual Freedom and Individual Salvation comes Individual Accountability. It brings a rewarding life to all. <--The Huff
Lmao...Originally Posted by kawzx7
http://verydemotivational.memebase.c...s-holy-crap-5/
Not sure if it will show or not. Still figuring this tapacrap out. WTH don't they make this simple!!!!!
The trouble with our liberal friends is not that they are ignorant. It's just that they know so much that isn't so. -- Ronald Reagan
With Individual Freedom and Individual Salvation comes Individual Accountability. It brings a rewarding life to all. <--The Huff
2008 M109R2, "SS" Theme, 69 Camero Hugger Orange Paint, Raw Pipe, Thunder air, Cobra Pro Auto Tuner, 260 / 160 Metz's, Chrome Stock Wheels, Seat by Abe, 2" Bar Ext, Barons Fender Eliminator, Squirrel Chrome Cover, Chrome Fork Covers,M50 Floorboards, Rear Caliper Relocate, All S/S Braided Lines, Lowered Front, L&M Chin Spoiler
42 Front and 40 Rear.
I think that's backwards...most run 42 out back and 40 up front.
Sent from a Thunderbolt
"Blaze"
I run what the tire says on the sidewall for max psi.
-Josh
If the side wall says 50 I would run it for starters and go from there. Its a large tire on that rim and if you have to dance on the front tire to save your butt it could collapse being under on air.
Just throwing out some safety matters.
What other people think of you is none of your business.
42 up front (160) and 44 rear (280)
NY Phat Boyz - Vice President
Filled mine to the recommended 50psi day before I left for Sturgis. Put smart cap on. 10 days and 3800 miles later, from Louisiana and back, the front end never felt better. Smart cap not yet blinking. However, cap on rear started blinking the day after my return.
Yeah.. I run about 46 up front.. I figure in between what others say and whats been noted on tire and another thread i once read...
And then I kick the tire and say funny spanish words like lucy ricardo once did... alls good..
I maintain my 160 at about 40 psi. It seems about right for road grip, comfort and tire wear for this bike. And I promise you, you'll not lose your bead in evasive manuevering at this pressure.....and I'd rather be at 40 than at 50 psi in an emergency situation with any sand or gravel on the road.
Last edited by The Chief; 08-17-2012 at 12:47 PM.
Political correctness is a doctrine, fostered by a delusional illogical minority, and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a turd by the clean end.
Posting Permissions
Reply With Quote
